NO.32 Refer to the exhibit.

A network administrator has a Mobility Master (MM) Mobility Controller (MC) architecture along with the MC in the DMZ for terminating RAPs. The network firewall has been provisioned to allow access to the MC in the DMZ for both UDP 500 and 4500. Then he proceeds to provision an AP as shown in the exhibit.
Which additional configuration steps must the administrator to assure RAPs successfully contact the MC? (Choose two.)

NO.33 Refer to the exhibit.

The network administrator must ensure that the configuration will force users to authenticate periodically every eight hours. Which configuration is required to effect this change?

NO.34 Refer to the exhibit.

A network administrator deploys a Mobility Master (MM) – Mobility Controller (MC) network with Aps in different locations. Users in one of the locations report that the WiFi network works fine for several hours, and then they are suddenly disconnected. This symptom may happen at any time, up to three times every day, and lasts no more than two minutes.
After some research, the network administrator logs into the MM and reviews the output shown in the exhibit.
Based on this information, what is the most likely reason users get disconnected?

NO.35 Refer to the exhibits.


A user reports slow connectivity to a network administrator when connecting to AP-Garden and suggests that there might be a problem with the WLAN. The user’s device supports 802.11n in the 2.4 GHz band. The network administrator finds the user in the Mobility Master (MM) and reviews the output shown in the exhibit.
What can the network administrator conclude after analyzing the data?

NO.36 Refer to the exhibit.

A network administrator adds a Mobility Controller (MC) in the /mm level and notices that the device does not show up in the managed networks hierarchy. The network administrator accesses the CLI. executes the show switches command, and obtains the output shown in the exhibit.
What is the reason that the MC does not appear as a managed device in the hierarchy?

NO.37 Refer to the exhibits.
Exhibit 1

Exhibit 2

Exhibit 3

A network administrator wants to allow contractors to access the corporate WLAN named EmployeesNet with the contractor role in VLAN 40. When users connect, they do not seem to get an IP address. After some verification checks, the network administrator confirms the DHCP server (10.254.1.21) is reachable from the Mobility Controller (MC) and obtains the outputs shown in the exhibits.
What should the network administrator do next to troubleshoot this problem?

NO.38 A network administrator wants to receive a major alarm every time a controller or an Aruba switch goes down for either a local or an upstream device failure. Which alarm definition must the network administrator create to accomplish this?

NO.39 Refer to the exhibits.



A network administrator has fully deployed a WPA3 based WLAN with 802.1X authentication. Later he defined corp-employee as the default user-role for the 802.1X authentication method in the aaa profile. When testing the setup he realizes the client gets the “guest” role.
What is the reason “corp-employee” user role was not assigned?

NO.40 Refer to the exhibit.

After deploying several cluster pairs, the network administrator notices that all APs assigned to Cluster1 communicate with MC1 instead of being distributed between members of the cluster. Also, no IP addresses are shown under the Standby IP column.
What should the network administrator do to fix this situation?

NO.41 Refer to the exhibit.

Based on the output shown in the exhibit, which wireless connection phase has just completed?

NO.42 A network administrator has racked up a 7210 Mobility Controller (MC) that will be terminating 200+ Aps on a medium-size branch office. Next, the technician cabled the appliance with 4SPF+ Direct Attached Cables (DACs) distributed between two-member switching stack and powered it up.
What must the administrator do next in the MCs to assure maximum wired bandwidth utilization?

NO.43 Users run encrypted Skype for Business traffic with no WMM support over an Aruba Mobility Master (MM) – Mobility Controller (MC) based network. When voice, video, and application sharing traffic arrive at the wired side of the network, all the flows look alike due to the lack of L2 and L3 markings How can the network administrator identify these flows and mark QoS accordingly?

NO.44 A network administrator is in charge of a Mobility Master (MM) – Mobility Controller (MC) based WLAN. The administrator has deployed an Airwave Management Platform (AMP) server in order to improve the monitoring capabilities and generate reports and alerts.
The administrator has configured SNMPv3 and Admin credentials on both the MMs and MCs and has created Groups and Folders in the AMP server.
What two additional steps must the administrator do in order to let Airwave monitor the network devices? (Choose two.)

NO.45 A network administrator has deployed an Airwave Management Platform (AMP) server and integrated it with a Mobility Master (MM) – Mobility Controller (MC) based WLAN. The AMP server already has all Aruba Mobility devices including Access Points (APs) in the “UP” devices list.
What are two actions the administrator can execute upon the APs under “Airwave>Devices>Monitor”? (Choose two.)

NO.46 A software development company has 764 employees who work from home. The company also has small offices located in different cities throughout the world. During working hours, they use RAPs to connect to a datacenter to upload software code as well as interact with databases.
In the past two month, cabling issues have occurred connection to the 7240XM Mobility Controller (MC) that runs ArubaOS 8 and terminates the RAPs. These RAPs disconnect, affecting the users connected to the RAPs. This also causes problems with code uploads and database synchronizations. Therefore, the company decides to add a second 7240XM controller for redundancy.
How should the network administrator deploy both controllers in order to provide the redundancy while preventing failover events from disconnecting users?

NO.47 A joint venture between two companies results in a fully functional WLAN Aruba solution. The network administrator uses the following script to integrate the WLAN solution with two radius servers, radius1 and radius2.

While all users authenticate with [email protected] type of credentials, radius1 has user accounts with the domain name portion.
Which additional configuration is required to authenticate corp1.com users with radius1 and corp2 users with radius2?

NO.48 An organization wants to deploy a WLAN infrastructure that provides connectivity to these client categories:
* Employees
* Contractors
* Guest users
* Corporate IoT legacy devices that support no authentication or encryption Employees and contractors must authenticate with company credentials and get network access based on AD group membership. Guest users are required to authenticate with captive portal using predefined credentials. Only employees will run L2 encryption.
Which implementation plan fulfills the requirements while maximizing the channel usage?

NO.49 Refer to the exhibit.

A network administrator is validating client connectivity and executes the show command shown in the exhibit. Which authentication method was used by a wireless station?

NO.50 A network administrator is in charge of a Mobility Master (MM) – Mobility Controller (MC) based network security. Recently the Air Monitors detected a Rogue AP in the network and the administrator wants to enable “Tarpit” based wireless containment.
What profile must the administrator enable “tarpit” wireless containment on?

NO.51 Refer to the exhibit:

A company acquires ten barcode scanners to run inventory tasks. These WiFi devices support WPA2-PSK security only. The network administrator deploys a WLAN named scanners using the configuration shown in the exhibit.
What must the network administrator do next to ensure that the scanner devices successfully connect to their SSID?

NO.52 Users run Skype for Business on wireless clients with no WMM support over an Aruba Mobility Master (MM) – Mobility Controller (MC) based network. When traffic arrives at the wired network, it does not include either L2 or L3 markings.
Which configuration steps should the network administrator take to classify and mark voice and video traffic with UCC heuristics mode?

NO.53 A customer wants a WLAN solution that permits Aps to terminate WPA-2 encrypted traffic from different SSIDs to different geographic locations where non-related IT departments will take care of enforcing security policies. A key requirement is to minimize network congestion, overhead, and delay while providing data privacy from the client to the security policy enforcement point. Therefore, the solution must use the shortest path from source to destination.
Which Aruba feature best accommodates this scenario?