This page was exported from Free Exam Dumps Collection [ http://free.examcollectionpass.com ] Export date:Wed Oct 23 19:20:51 2024 / +0000 GMT ___________________________________________________ Title: [Oct-2022] Pass JN0-663 Exam in First Attempt UpdatedJN0-663 ExamcollectionPass Exam Question [Q17-Q34] --------------------------------------------------- [Oct-2022] Pass JN0-663 Exam in First Attempt UpdatedJN0-663 ExamcollectionPass Exam Question JNCIP-SP Dumps JN0-663 Exam for Full Questions - Exam Study Guide NO.17 Exhibit:You notice an inconsistency between the routing table and the OSPF database, as shown in the exhibit.What are two reasons for this behavior? (Choose two.)  The LSA is a Type 4 LSA.  An OSPF export policy is being applied to the route.  An OSPF import policy is being applied to the route.  The LSA is a Type 5 LSA. NO.18 Exhibit:Referring to the exhibit, which two statements about route reflectors are correct? (Choose two.)  RR2 adds its cluster ID when advertising routes from CHent4 to Client3.  RR2 advertises routes learned from Client3 to EBGP2 with itself as the next hop.  RR1 advertises routes learned from Client1to RR2 with itself as the next hop.  RR1 and RR2 need the same cluster ID to exchange routes learned from their clients. NO.19 Click the Exhibit button.A network administrator is investigating why traffic from R2 is not being forwarded to R1 Referring to the show isis database command output shown in the exhibit, what is causing this problem on the network?  R1 and R2 are in different IS-IS areas.  The preferred interface between R1 and R2 is experiencing errors  R1 is configured to drop all incoming traffic.  R2 is ignoring specific LSPs from R1 in its SPF calculations. NO.20 Which two statements about IS-IS are correct? (Choose two.)  Level 1 intermediate systems exchange routing information with Level 1 intermediate systems on other IS-IS areas.  An IS-IS router sets the attached bit in the PDUs it sends to a Level 1 area to indicate that it is a backbone router.  A Level 1 router can only form adjacencies with other Level 1 routers.  Level 2 routers can form adjacencies with either Level 1 or Level 2 routers. NO.21 What occurs when a router running IS-IS receives an LSP with the overload bit set?  The LSP is not added to the link-state database.  The LSP”s metric will be set to 65535.  The LSP is ignored during SPF calculation.  The LSPs metric will be set to 16777215. NO.22 Exhibit:Which three statements are true about the show pim join output shown in the exhibit? (Choose three.)  This is a source-specific multicast stream. G The multicast receiver is still using the RP to receive the stream.  The multicast stream does not have an RP.  The multicast stream has been configured with a backup path to allow for fast reroute.  The shortest path to the source is through the RP NO.23 You are creating an LDP-signaled Layer 2 circuit between two sites. Site1 and Site2 use different VLAN IDs to connect to your PE devices In this scenario, which encapsulation type must be used on the logical interfaces?  vlan-bridge  vlan-ccc  vlan-tcc  vlan-vpls NO.24 Exhibit.You manage an MX Series device which includes the configuration shown in the exhibit Traffic marked with DSCP 000011 is entering the ge-1/0’4 interface at 102 Mbps The traffic exits the device on the ge-1 ‘0/5 interface No other traffic is transiting the router In this scenario what happens to traffic exceeding 100 Mbps?  Traffic exceeding 100 Mbps is redirected to a rate limiter.  Traffic exceeding 100 Mbps Is buffered  Traffic exceeding 100 Mbps is forwarded.  Traffic exceeding 100 Mbps is dropped NO.25 Exhibit:The exhibit shows a BGP peering session for two PE routers. The BGP session is up, but the hosts in the Layer2 VPN that uses the BGP session are unable to communicate.What is the problem in this situation?  The BGP peer does not support the restarter functionality.  The local BGP router does not support Layer 2 VPN and Layer 3 VPN NLRI address families at the same time.  There is a mismatch in the supported NLRI address families between the BGP peers.  The BGP peer does not support the add-path feature. NO.26 Exhibit:Referring to the exhibit, which two statements are true? (Choose two.)  This router is an ABR  This router is an ASBR.  There are two interfaces marked as passive.  There is one interface marked as passive. NO.27 Exhibit:Referring to the exhibit, which two statements are true? (Choose two.)  This router is an ABR  This router is an ASBR.  There are two interfaces marked as passive.  There is one interface marked as passive. NO.28 Exhibit:Referring to the exhibit, external routes are being received at R1. These routes must appear on R5.Which action will produce this result?  Turn on wide metrics on R1 and R2 and write an export policy on R4 from level 2 to level 1 matching the external routes.  Turn on wide metrics on R4 and R5 and write an export policy on R2 from level 1 to level 2 matching the external routes.  Write an export policy on R4 from level 2 to level 1 matching the external routes.  Write an export policy on R2 from level 1 to level 2 matching the external routes. NO.29 Exhibit:You are troubleshooting an issue where R1 is no longer receiving the default IS-IS route from R3.Referring to the exhibit, which action would you take to solve the problem?  Delete the protocols isis ignore-attached-bit configuration statement on R3.  Delete the protocols isis import configuration statement on R1.  Delete the protocols isis level 2 disable configuration statement on R3.  Delete the protocols isis ignore-attached-bit configuration statement on R1. NO.30 Exhibit:Referring to the exhibit, you have recently established a Layer 3 VPN between PE-1 and PE-2, connecting the two CE sites. Rowing information is being shared between sites and the customer has two-way communication After adding this VPN to your core network, PE-1 and PE-2 are no longer able to forward traffic to the Internet.In this scenario, what is the problem?  You must configure the inet unicast NLRI for the BGP session on both your PE devices.  You must configure a separate internal BGP group on both your PE devices specifically for Internet connectivity.  You must configure the inet-vpn NLRI for the BGP sessions on both your PE devices.  You must configure a multihop external BGP session between your PE devices and the Internet provider’s ISP-A device. NO.31 Referring to the exhibit, which OSPFv3 configuration is implemented on router R1?set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0  set protocols ospf3 area 0.0.0.1 interface ge-0/0/1.0set protocols ospf3 area 0.0.0.1 interface ge-0/0/0.0set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0  set protocols ospf3 area 0.0.0.1 interface ge-0/0/1.0set protocols ospf3 area 0.0.0.1 virtual-link neighbor-id 172.16.1.2set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0  set protocols ospf3 area 0.0.0.1 interface ge-0/0/1.0set protocols ospf3 area 0.0.0.1 interface ge-0/0/0.0 secondaryset protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0  set protocols ospf3 area 0.0.0.1 interface ge-0/0/1.0set protocols ospf3 area 0.0.0.1 interface ge-0/0/0.0 interface-type p2p NO.32 You have an established Layer 3 VPN between two PE devices. You are asked to only send certain routes from PE-1 over the VPN to the remote site while maintaining all the routes on the PE-1 device. You created a policy that matches the specific routes and then tags these routes with the appropriate target community values.In this scenario, which configuration changes must be made to satisfy the requirement?  Configure the export parameter and apply the policy to the my-ext-groupBGP group configuration.  Configure the vrf-exportparameter and apply the policy under the edit routing-instances vpn-ahierarchy.  Configure a RIB group and apply the policy as an import policy to routes distributed into the bgp.13vpn.0 routing table.  Configure the import parameter and apply the policy to the my-ext-groupBGP group configuration. NO.33 Exhibit.You have the LDP signaled VPLS topology as shown in the exhibit CE-B at Site-2 is multihomed to both PE-2 and PE-3 In this scenario where would you configure loop prevention?  PE-2  PE-3  CE-B  PE-1 NO.34 You recently deployed CoS-based forwarding in your network, which uses OSPF as its IGP You notice that the forwarding of traffic has not changed and is not following the path indicated within your configuration.In this scenario, which statement explains this behavior?  The defined policy has not been applied under [edit class-of-service forwarding-policy  The defined policy references interface names as the next-hops instead of IP addresses.  Load balancing has not been enabled under [edit forwarding-options.  The defined policy references IP addresses as the next-hops instead of interface names  Loading … What is the duration of the Service Provider Routing and Switching, Professional JN0-663 Exam Format: Multiple choices, multiple answersLength of Examination: 120 minutesLanguage: EnglishNumber of Questions: 65   Authentic Best resources for JN0-663 Online Practice Exam: https://www.examcollectionpass.com/Juniper/JN0-663-practice-exam-dumps.html --------------------------------------------------- Images: https://free.examcollectionpass.com/wp-content/plugins/watu/loading.gif https://free.examcollectionpass.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-10-03 12:08:00 Post date GMT: 2022-10-03 12:08:00 Post modified date: 2022-10-03 12:08:00 Post modified date GMT: 2022-10-03 12:08:00