This page was exported from Free Exam Dumps Collection [ http://free.examcollectionpass.com ] Export date:Wed Nov 27 22:40:44 2024 / +0000 GMT ___________________________________________________ Title: Latest Dec 16, 2022 GB0-381-ENU Brain Dump A Study Guide with Tips & Tricks for passing Exam [Q221-Q238] --------------------------------------------------- Latest Dec 16, 2022 GB0-381-ENU Brain Dump: A Study Guide with Tips & Tricks for passing Exam GB0-381-ENU Question Bank: Free PDF Download Recently Updated Questions Q221. In IS-IS, what is the difference between Hello messages on P2P type links and LAN type links?  Inconsistent types, use P2P IIH and LAN IIH respectively  The sending method is inconsistent, P2P adopts unicast, LAN adopts multicast  The sending interval is inconsistent, P2P is 10s, while LAN is 3.3s  LAN IIH is divided into Level-1 and Level-2, but P2P does not distinguish Q222. Regarding the NSSA area of the OSPF protocol, the following statements are correct: _______  There can be multiple ASBRs in an NSSA area  Injection of Tpe3 LSA and Tpe4 LSA is not allowed in the NSSA area  Tpe7 LSA injection is not allowed in the NSSA area  Virtual links cannot pass through the NSSA area Q223. Among the following routing protocols, the one belonging to the IGP is ______, and the one that uses the link state algorithm is ______.  BGP; OSPF  OSPF; BGP  RIP; RIP  S-IS; IS-IS Q224. The router uses the Router-ID to generate the NET address of the IS-IS process. The benefits are ______.  Router-ID and Stem-ID in NET are bound by default for easy maintenance  NET is generated by Router-ID, easy to remember  Using the unique Router-ID in the entire network can ensure the uniqueness of the IS-IS process NET of the entire network  In case of device replacement, both Router-ID and Stem-ID can be flexibly modified Q225. Regarding the Tpe4 LSA in the OSPF protocol, the correct statement is ______  Tpe4 LSA is generated by ASBR  The role of Tpe4 LSA is to inform the routers in the area how to reach the ASBR  The target network actually described by Tpe4 LSA is the OSPF Router ID of the ASBR  The propagation range of Tpe4 LSA is limited to the backbone area Q226. In the topology shown in the figure, the following configurations are performed on RTA , RTB , RTC and RTD respectivelythen no injection into zone 2  Type3 LSA  Type4 LSA  Type5 LSA  Type7LSA Q227. The networking is shown in the figure, RTB advertises route 13.14.3.0/24 to RTA, LP is 150, MED is 50. Route received by RTC from RTAWhat is the LP and MED of 13.14.3.0/24?  No LP, no MED  LP 150 , MED 50  No LP, MED 50  LP 100 , no MED Q228. In the topology shown in the figure, perform the following configurations on RTA and RTC respectively:RTA-ospf-1] area 1RTA-ospf-1-area-0.0.0.1] authentication-mode simpleRTA] interface GigabitEthernet0/0RTA-GigabitEthernet0/0] ospf authentication-mode simple plain 12345RTC-ospf-1] area 0RTC-ospf-1-area-0.0.0.0] authentication-mode simpleRTC] interface GigabitEthernet0/0RTC-GigabitEthernet0/0] ospf authentication-mode simple plain 54321If RTB needs to establish neighbor relationships with RTA and RTC respectively, which of the following configurations needs to be performed on RTB?  RTB-ospf-1-area-0.0.0.0] authentication-mode simple RTB] interface GigabitEthernet0/0 RTB-GigabitEthernet0/0] ospf authentication-mode simple plain 12345 RTB] interface GigabitEthernet0/1 RTB-GigabitEthernet0/1] ospf authentication-mode simple plain 54321  RTB-ospf-1-area-0.0.0.0] authentication-mode simple RTB-ospf-1-area-0.0.0.1] authentication-mode simple RTB] interface GigabitEthernet0/0 RTB-GigabitEthernet0/0] ospf authentication-mode simple plain 12345 RTB] interface GigabitEthernet0/1 RTB-GigabitEthernet0/1] ospf authentication-mode simple plain 54321  RTB-ospf-1-area-0.0.0.0] authentication-mode simple RTB-ospf-1-area-0.0.0.1] authentication-mode simple RTB] interface GigabitEthernet0/0 RTB-GigabitEthernet0/0] ospf authentication-mode simple plain 54321 RTB] interface GigabitEthernet0/1 RTB-GigabitEthernet0/1] ospf authentication-mode simple plain 12345  RTB-ospf-1-area-0.0.0.0] authentication-mode md5 RTB-ospf-1-area-0.0.0.1] authentication-mode md5 RTB] interface GigabitEthernet0/0 RTB-GigabitEthernet0/0] ospf authentication-mode simple plain 12345 RTB] interface GigabitEthernet0/1 RTB-GigabitEthernet0/1] ospf authentication-mode simple plain 54321 Q229. In the OSPF protocol, the correct statement about ABR aggregation is ______  ABR can aggregate Tpe3 LSA  ABR can aggregate Tpe4 LSA not generated by itself  When the ABR colleague is also a conversion router in the NSSA area, the Tpe5 LSA converted from the Tpe7 LSA can be aggregated  ABR can aggregate all Tpe5 LSAs Q230. The networking is as shown in the figure, RTA, RTB are located in AS 100, RTC, RTD, RTE are located in AS 200, AS 100 advertises BGP route 1.0.0.0/24 to AS 200, the main configuration of BGP of RTC and RTD is as follows, may I ask the BGP route on RTE 1.0.0.0/24 Who does the next hop point to?RTC]bgp 200peerRTA as-number 90peerRTD as-number 200peerRTA preferred-value 100peerRTA route-policsetlp importroute-policsetlp permit node 10appllocal-preference 200RTD]bgp 200peerRTB as-number 100peerRTC as-number 200peerRTA route-policsetlp importroute-policsetlp permit node 10appllocal-preference 300  The next hop is RTC, because the preferred-value of RTC is 90  The next hop is RTC, because the preferred-value of RTC is 200  The next hop is RTD, because the preferred-value of RTC is 100  RTD of the next hop, because the preferred-value of RTC is 3100 Q231. In the network shown in the figure, the BGP route learning among the routers is normal, and the BGP route attributes all take the default values.After the route 9.0.0.0 is imported into BGP on RTD, if the next hop of route 9.0.0.0 on RTA is to point to RTB, the following adjustment methods are feasible: ______  Set the Local Preference value of the route received by RTA from RTB to 200  Set the Local Preference value of the route received by RTA from RTB to 50  Set the Local Preference value of the route received by RTA from RTC to 200  Set the Local Preference value of the route received by RTA from RTC to 50 Q232. Drag and drop  1.1.1.1  2.2.2.2  3.3.3.3  192.168.1.1 Q233. Drag and drop  1.1.1.1/32  2.2.2.2/32  3.3.3.3/32  0.0.0.0/0 Q234. In the OSI network system, the one with similar functions to the IP protocol in TCP/IP is _________.  Connectionless Network Protocol ( CLNP )  Connectionless Network Service ( CLNS )  Network Protocol Data Unit (NPDU)  Network Service Access Point (NSAP) Q235. A local area network has been in operation for 2 years (17,520 hours), and was out of service for 6 hours due to equipment failure. After the network was expanded and new equipment was added, it ran for another year (8,760 hours), and was out of service for another 4 hours due to a software failure. Regarding the availability of this network (Availabilit), which of the following statements are correct?  The availability of the network after the expansion is better than before the expansion  The availability of the network after the expansion is worse than before the expansion  Before expansion, network availability was 99.97%  From the beginning of the network to the present, its availability is 99.99% Q236. Regarding filter-polic filtering RIP routing, which of the following statements are correct?  RIP routes can be filtered by configuring ACL  RIP routes can be filtered through the IP address prefix list  The routing information can be filtered through the publishing gateway  The routing information can be filtered through the interface Q237. After executing the displaospf routing command on the MSR router RTA, the router output is as follows:From the above output, you can judge ______.  There are 6 OSPF routes in total, including 1 intra-area route, 1 inter-area route, and 4 external routes  192.168.100.1 is the received Tpe1 LSA  192.168.102.1 is the received Tpe2 LSA  The network segment 192.168.2.0 is not in Area0 Q238. In the topology shown in the figure, the correct IP addresses have been configured on RTA, RTB and RTC, and the network layer is reachable.If OSPF neighbors need to be established between routers and routes are transmitted correctly, which of the following configurations is definitely feasible?  RTA] ospf 1 router-id 1.1.1.1 RTA-ospf-1] area 0 RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255 RTB] ospf 1 router-id 2.2.2.2 RTB-ospf-1] area 0 RTB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255 RTC] ospf 1 router-id 3.3.3.3 RTC-ospf-1] area 0 RTC-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255  RTA] ospf 1 router-id 1.1.1.1 RTA-ospf-1] peer 192.168.1.2 RTA-ospf-1] peer 192.168.1.3 RTA-ospf-1] area 0 RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255 RTB] ospf 1 router-id 2.2.2.2 RTB-ospf-1] area 0 RTB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255 RTC] ospf 1 router-id 3.3.3.3 RTC-ospf-1] area 0 RTC-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255  RTA-Serial5/0] fr map ip 192.168.1.3 20 broadcast RTA-Serial5/0] fr map ip 192.168.1.2 50 broadcast RTA-Serial5/0] ospf network-tpe p2mp RTA] ospf 1 router-id 1.1.1.1 RTA-ospf-1] area 0 RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255 RTB-Serial5/0] fr map ip 192.168.1.1 30 broadcast RTB-Serial5/0] ospf network-tpe p2mp RTB] ospf 1 router-id 2.2.2.2 RTB-ospf-1] area 0 RTB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255 RTC-Serial5/0] fr map ip 192.168.1.1 40 broadcast RTC-Serial5/0] ospf network-tpe p2mp RTC] ospf 1 router-id 3.3.3.3 RTC-ospf-1] area 0 RTC-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255  RTA-Serial5/0] ospf dr-priorit50 RTA] ospf 1 router-id 1.1.1.1 RTA-ospf-1] peer 192.168.1.2 RTA-ospf-1] peer 192.168.1.3 RTA-ospf-1] area 0 RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255 RTB] ospf 1 router-id 2.2.2.2 RTB-ospf-1] peer 192.168.1.1 RTB-ospf-1] area 0 RTB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255 RTC] ospf 1 router-id 3.3.3.3 RTC-ospf-1] peer 192.168.1.1 RTC-ospf-1] area 0 RTC-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255  Loading … New GB0-381-ENU Exam Dumps with High Passing Rate: https://www.examcollectionpass.com/H3C/GB0-381-ENU-practice-exam-dumps.html --------------------------------------------------- Images: https://free.examcollectionpass.com/wp-content/plugins/watu/loading.gif https://free.examcollectionpass.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-12-16 16:07:39 Post date GMT: 2022-12-16 16:07:39 Post modified date: 2022-12-16 16:07:39 Post modified date GMT: 2022-12-16 16:07:39