This page was exported from Free Exam Dumps Collection [ http://free.examcollectionpass.com ] Export date:Wed Feb 5 14:47:30 2025 / +0000 GMT ___________________________________________________ Title: [May 12, 2023] Pass NSE 5 Network Security Analyst NSE5_FMG-7.0 Exam With 74 Questions [Q16-Q40] --------------------------------------------------- [May 12, 2023] Pass NSE 5 Network Security Analyst NSE5_FMG-7.0 Exam With 74 Questions Ultimate Guide to Prepare Free Fortinet NSE5_FMG-7.0 Exam Questions and Answer To pass the Fortinet NSE5_FMG-7.0 exam, candidates must demonstrate their ability to configure and manage FortiManager 7.0, including deploying and managing policies, monitoring device status, and troubleshooting issues. In addition, candidates must have a solid understanding of network security concepts, such as firewall policies, VPNs, and security fabric integration. Successful candidates will be able to demonstrate their ability to design and implement complex security solutions using Fortinet's products and solutions. Overall, the Fortinet NSE5_FMG-7.0 exam is an important certification for individuals who want to demonstrate their expertise in managing and deploying Fortinet's security solutions. The Fortinet NSE5_FMG-7.0 exam is designed for individuals who want to demonstrate their expertise in managing and deploying Fortinet security solutions. This exam is part of the Fortinet Network Security Expert (NSE) program, which is a comprehensive training and certification program that validates an individual's knowledge and skills in Fortinet's security products and solutions. The Fortinet NSE5_FMG-7.0 exam specifically focuses on FortiManager 7.0, which is a centralized management solution that provides a single pane of glass for managing and monitoring Fortinet security devices. The Fortinet NSE5_FMG-7.0 exam is an important certification for security professionals who are looking to gain expertise in FortiManager 7.0. This exam is challenging and requires a deep understanding of FortiManager 7.0. However, individuals who pass this exam are equipped with the necessary skills and knowledge to manage and configure FortiManager 7.0 in a production environment. This certification is recognized globally and is highly valued by employers, making it an excellent investment for security professionals.   Q16. View the following exhibit.If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)  FortiGate is discovered by FortiManager through the FortiGate NATed IP address.  FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured onFortiGate under central management.  During discovery, the FortiManager NATed IP address is not set by default on FortiGate.  If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel. Fortimanager can discover FortiGate through a NATed FortiGate IP address. If a FortiManager NATed IP address is configured on FortiGate, then FortiGate can announce itself to FortiManager. FortiManager will not attempt to re-establish the FGFM tunnel to the FortiGate NATed IP address, if the FGFM tunnel is interrupted. Just like it was in the NATed FortiManager scenario, the FortiManager NATed IP address in this scenario is not configured under FortiGate central management configuration.Q17. An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.Which troubleshooting step should you take to resolve the issue?  Make sure FortiManager Access is enabled in the administrator profile  Make sure Offline Mode is disabled  Make sure the administrator IP address is part of the trusted hosts.  Make sure ADOMs are enabled and the administrator has access to the Global ADOM Even if a user entered the correct userid/password, the FMG denies access if a user is logging in from an untrusted source IP subnets.Q18. View the following exhibit.Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?  The Install On column value represents successful installation on the managed devices  Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets  Policy seq#3 will be installed on the Trainer[NAT] VDOM only  Policy seq#3 will be not installed on any managed device Q19. An administrator configures a new firewall policy on FortiManager and has not yet pushed the changes to the managed FortiGate.In which database will the configuration be saved?  Device-level database  Revision history database  ADOM-level database  Configuration-level database https://kb.fortinet.com/kb/documentLink.do?externalID=FD47942Q20. When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?  After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.  FortiManager will revert and install a previous configuration revision on the managed FortiGate.  FortiGate will reject the CLI commands that will cause the tunnel to go down.  FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down. The configuration change will break the fgfm connection, causing the FortiGate unit to attempt to reconnect for 900 seconds. If the FortiGate cannot reconnect, it will rollback to its previous configuration.Q21. An administrator is in the process of moving the system template profile between ADOMs by running the following command:execute improfile import-profile ADOM2 3547 /tmp/myfileWhere does the administrator import the file from?  File system  ADOM1  ADOM2 object database  ADOM2 Q22. Refer to the exhibit.You are using the Quick Install option to install configuration changes on the managed FortiGate.Which two statements correctly describe the result? (Choose two.)  It will not create a new revision in the revision history  It installs device-level changes to FortiGate without launching the Install Wizard  It cannot be canceled once initiated and changes will be installed on the managed device  It provides the option to preview configuration changes prior to installing them FortiManager_6.4_Study_Guide-Online – page 164The Install Config option allows you to perform a quick installation of device-level settings without launching the Install Wizard. When you use this option, you cannot preview the changes prior to committing. Administrator should be certain of the changes before using this install option, because the install can’t be cancelled after the process is initiated.Q23. An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?  When creating a new policy package, the administrator can select the option to assign the global policypackage to the new policy package  When a new policy package is created, the administrator needs to reapply the global policy package toADOM1.  When a new policy package is created, the administrator must assign the global policy package from the global ADOM.  When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package. Q24. What does the diagnose dvm check-integrity command do? (Choose two.)  Internally upgrades existing ADOMs to the same ADON version in order to clean up and correct the ADOMsyntax  Verifies and corrects unregistered, registered, and deleted device states  Verifies and corrects database schemas in all object tables  Verifies and corrects duplicate VDOM entries 6.2 Study Guide page 305 verify and correct parts of the device manager databases, including: – inconsistent device-to-group and group-to-ADOM memberships – unregistered, registered, and deleted device states – device lock statuses – duplicate VDOM entriesQ25. Refer to the exhibit.Which statement about the object named ALL is true?  FortiManager updated the object ALL using the FortiGate value in its database.  FortiManager installed the object ALL with the updated value.  FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.  FortiManager updated the object ALL using the FortiManager value in its database. Q26. View the following exhibit.When using Install Config option to install configuration changes to managed FortiGate, which of the following statements are true? (Choose two.)  Once initiated, the install process cannot be canceled and changes will be installed on the managed device  Will not create new revision in the revision history  Installs device-level changes to FortiGate without launching the Install Wizard  Provides the option to preview configuration changes prior to installing them Q27. Which of the following statements are true regarding schedule backup of FortiManager? (Choose two.)  Backs up all devices and the FortiGuard database.  Does not back up firmware images saved on FortiManager  Supports FTP, SCP, and SFTP  Can be configured from the CLI and GUI Q28. Refer to the exhibit.Which two statements about the output are true? (Choose two.)  The latest revision history for the managed FortiGate does match with the FortiGate running configuration  Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed  The latest history for the managed FortiGate does not match with the device-level database  Configuration changes directly made on the FortiGate have been automatically updated to device-level databaseExplanation:STATUS: dev-db: modified; conf: in sync; cond: pending; dm: retrieved; conn: up – dev-db: modified – This is the device setting status which indicates that configuration changes were made on FortiManager. – conf: in sync – This is the sync status which shows that the latest revision history is in sync with Fortigate’s configuration. – cond: pending – This is the configuration status which says that configuration changes need to be installed.Most probably a retrieve was done in the past (dm: retrieved) updating the revision history DB (conf: in sync) and FortiManager device level DB, now there is a new modification on FortiManager device level DB (dev-db: modified) which wasn’t installed to FortiGate (cond: pending), hence; revision history DB is not aware of that modification and doesn’t match device DB.Conclusion: – Revision DB does match FortiGate. – No changes were installed to FortiGate yet. – Device DB doesn’t match Revision DB. – No changes were done on FortiGate (auto-update) but configuration was retrieved insteadAfter an Auto-Update or Retrieve: device database = latest revision = FGTThen after a manual change on FMG end (but no install yet): latest revision = FGT (still) but now device database has been modified (is different).After reverting to a previous revision in revision history: device database = reverted revision != FGTQ29. Refer to the exhibits.Exhibit one.Exhibit two.An administrator created a new system template named Training with two new DNS addresses on FortiManager. During the installation preview stage, the administrator notices that many unset commands need to be pushed.What can be the main reason for these unset commands?  The DNS addresses in the default system settings are the same as the Training system template  The Training system template has other default settings  The ADOM is locked by another administrator  The Training system template does not have assigned devices Q30. Refer to the exhibit.According to the error message why is FortiManager failing to add the FortiAnalyzer device?  The administrator must turn off the Use Legacy Device login and add the FortiAnaJyzer device to the same network as Forti-Manager  The administrator must select the Forti-Manager administrative access checkbox on the FortiAnalyzer management interface  The administrator must use the Add Model Device section and discover the FortiAnaJyzer device  The administrator must use the correct user name and password of the FortiAnalyzer device Q31. An administrator has enabled Service Access on FortiManager.What is the purpose of Service Access on the FortiManager interface?  Allows FortiManager to download IPS packages  Allows FortiManager to respond to request for FortiGuard services from FortiGate devices  Allows FortiManager to run real-time debugs on the managed devices  Allows FortiManager to automatically configure a default route FortiManager 6.2 Study guide page 350Q32. Refer to the exhibit.According to the error message why is FortiManager failing to add the FortiAnalyzer device?  The administrator must turn off the Use Legacy Device login and add the FortiAnaJyzer device to the same network as Forti-Manager  The administrator must select the Forti-Manager administrative access checkbox on the FortiAnalyzer management interface  The administrator must use the Add Model Device section and discover the FortiAnaJyzer device  The administrator must use the correct user name and password of the FortiAnalyzer device Q33. An administrator wants to delete an address object that is currently referenced in a firewall policy.What can the administrator expect to happen?  FortiManager will not allow the administrator to delete a referenced address object  FortiManager will disable the status of the referenced firewall policy  FortiManager will replace the deleted address object with the none address object in the referenced firewall policy  FortiManager will replace the deleted address object with all address object in the referenced firewall policy Q34. Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)  Managed gateways are devices managed by FortiManager in the same ADOM  External gateways are third-party VPN gateway devices only  Protected subnets are the subnets behind the device that you don’t want to allow access to over the IPsec VPN  Managed devices in other ADOMs must be treated as external gateways Q35. Refer to the exhibit.An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?  192.168.0.1/24  10.200.1.0/24  It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.  Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings. Q36. What will be the result of reverting to a previous revision version in the revision history?  It will install configuration changes to managed device automatically  It will tag the device settings status as Auto-Update  It will generate a new version ID and remove all other revision history versions  It will modify the device-level database Q37. Refer to the exhibit.Which two statements about the output are true? (Choose two.)  The latest revision history for the managed FortiGate does match with the FortiGate running configuration  Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed  The latest history for the managed FortiGate does not match with the device-level database  Configuration changes directly made on the FortiGate have been automatically updated to device-level databaseExplanation:STATUS: dev-db: modified; conf: in sync; cond: pending; dm: retrieved; conn: up – dev-db: modified – This is the device setting status which indicates that configuration changes were made on FortiManager. – conf: in sync – This is the sync status which shows that the latest revision history is in sync with Fortigate’s configuration. – cond: pending – This is the configuration status which says that configuration changes need to be installed.Most probably a retrieve was done in the past (dm: retrieved) updating the revision history DB (conf: in sync) and FortiManager device level DB, now there is a new modification on FortiManager device level DB (dev-db: modified) which wasn’t installed to FortiGate (cond: pending), hence; revision history DB is not aware of that modification and doesn’t match device DB.Conclusion: – Revision DB does match FortiGate. – No changes were installed to FortiGate yet. – Device DB doesn’t match Revision DB. – No changes were done on FortiGate (auto-update) but configuration was retrieved instead After an Auto-Update or Retrieve: device database = latest revision = FGT Then after a manual change on FMG end (but no install yet): latest revision = FGT (still) but now device database has been modified (is different).After reverting to a previous revision in revision history: device database = reverted revision != FGTQ38. An administrator would like to create an SD-WAN using central management in the Training ADOM.To create an SD-WAN using central management, which two steps must be completed? (Choose two.)  Specify a gateway address when you create a default SD-WAN static route  Enable SD-WAN central management in the Training ADOM  Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD-WAN template settings  Remove all the interface references such as routes or policies that will be a part of SD-WAN member interfaces Q39. Which configuration setting for FortiGate is part of an ADOM-level database on FortiManager?  NSX-T Service Template  Security profiles  SNMP  Routing Q40. View the following exhibit.If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)  FortiGate is discovered by FortiManager through the FortiGate NATed IP address.  FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on FortiGate under central management.  During discovery, the FortiManager NATed IP address is not set by default on FortiGate.  If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel. Fortimanager can discover FortiGate through a NATed FortiGate IP address. If a FortiManager NATed IP address is configured on FortiGate, then FortiGate can announce itself to FortiManager. FortiManager will not attempt to re-establish the FGFM tunnel to the FortiGate NATed IP address, if the FGFM tunnel is interrupted. Just like it was in the NATed FortiManager scenario, the FortiManager NATed IP address in this scenario is not configured under FortiGate central management configuration. Loading … Pass NSE5_FMG-7.0 Tests Engine pdf - All Free Dumps: https://www.examcollectionpass.com/Fortinet/NSE5_FMG-7.0-practice-exam-dumps.html --------------------------------------------------- Images: https://free.examcollectionpass.com/wp-content/plugins/watu/loading.gif https://free.examcollectionpass.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2023-05-12 09:03:43 Post date GMT: 2023-05-12 09:03:43 Post modified date: 2023-05-12 09:03:43 Post modified date GMT: 2023-05-12 09:03:43