This page was exported from Free Exam Dumps Collection [ http://free.examcollectionpass.com ] Export date:Wed Nov 27 22:49:49 2024 / +0000 GMT ___________________________________________________ Title: Enhance your career with HPE6-A45 PDF Dumps - True HP Exam Questions [Q15-Q36] --------------------------------------------------- Enhance your career with HPE6-A45 PDF Dumps - True HP Exam Questions New (2023) Download free HPE6-A45 PDF for HP Practice Tests NO.15 A company has AOS-Switches deployed at sites with inexperienced IT staff. The main office network administrators want to track if configurations change on branch switches.What should be set up for this purpose?  an SNMP trap  an RMON alarm  an IP SLA profile  an auto-config server NO.16 Refer to the exhibit.A network administrator wants to add the protections of root guard to the network. Based on the spanning tree topology, on which ports should the network administrator implement root guard?  3-24  1 and 2  A1 and A2  2 and A3 NO.17 Refer to the exhibit.A company has IP phones that are LLDP-MED capable. The exhibit shows the configuration for the VLAN to which IP phones belong, as well as the configuration for ports to which phones will connect. AOS-Switches at the access layer are set up to use LLDP-MED. The administrator wants to automatically provision the phones to send traffic with the right VLAN tag and priority.Which additional configuration step must the administrator complete?  Specify LLDP-MED as the global LLDP mode  Specify the voice setting in VLAN 3  Enable LMA and configure the proper LMA profiles  Enable 802.1X and MAC-based VLANs on the ports NO.18 Refer to the exhibits.Exhibit 1.Exhibit 2.The VoIP phone connects, authenticates successfully, and is dynamically assigned to tagged VLAN 6. The endpoint connected to the phone does not authenticate but starts to send untagged traffic.How does the switch handle this traffic?  It forwards the traffic in VLAN 5.  It relays the traffic to the RADIUS server for authentication.  It forwards the traffic in VLAN 6.  It drops the traffic. NO.19 An AOS-Switch enforces 802.1X authentication to an Aruba ClearPass server. A user connects but cannot receive network access, even though the ClearPass administrator finds an Access-Accept for the user on this switch. The switch administrator suspects that there is an issue with the dynamic settings returned by ClearPass.Where should the administrator look for information about these settings?  in the details for port-access clients  in the detailed RADIUS server statistics  in the interface statistics  in the running-config for the interface NO.20 Refer to the exhibits.Exhibit 1Exhibit 2A network administrator applies the ACL to Switch-2, as shown in the exhibit. Device-1, IP address10.1.10.10/24, attempts to open an HTTP session with host 192.0.2.10 on the Internet. What happens with this attempt?  Switch-2 filters both the traffic from Device-1 and the return traffic with the ACL. The return traffic is dropped.  Switch-2 filters only the traffic from Device-1 with the ACL, and the session establishes successfully.  Switch-2 does not filter any of this traffic with the ACL, and the session establishes successfully  Switch-2 filters only the return traffic from the Internet with the ACL, and the ACL drops this traffic NO.21 Refer to the exhibits.Exhibit 1Exhibit 2A network administrator wants to set up mirroring of traffic from port 1 on Switch-1 to port 1 on Switch-2. Exhibit-2 shows the commands that the administrator enters. The mirroring does not work correctly.What must the administrator do to correct the error?  Change the port ID on Switch 1 to 50001, so that it is unique from the port ID on Switch-2.  Re-configure the mirror endpoint command on Switch-2 with the IP addresses reversed in order.  Remove the commands and re-enter them on Switch-1 first and then on Switch-2.  Specify the mirror endpoint command in Switch-1 and the mirror 1 remote-ip command on Switch-2. NO.22 Refer to the exhibits.Exhibit 1Exhibit 2Network administrators are alerted to high interface utilization on a switch by a management solution. They examine the utilization on the uplink interfaces several times an hour during problem times. The exhibit shows output typical of times of congestion. The administrators want to allocate bandwidth fairly and reduce congestion on the uplinks.What could help meet these requirements?  a per-queue rate limit on interfaces 1 and 2  an outbound rate limit on each edge port  a broadcast rate limit on each edge port  an outbound rate limit on interfaces 1 and 2 NO.23 Refer to the exhibit.The network administrator wants to summarize routes as much as possible in between areas. What is the correct range to specify for the router OSPF Area 2 command on Switch-2?  10.0.0.0/20  10.0.0.0/21  10.0.8.0/21  10.0.16.0/21 NO.24 Refer to the exhibit.A network administrator wants to prevent endpoints from spoofing the MAC address of the VLAN 2 default gateway. What should the administrator configure on Switch-1?  MAC lockdown of the default gateway MAC address on ports 1-20  MAC lockdown of the default gateway MAC address on trk1  default gateway MAC address as a port security authorized address on trk1  default gateway MAC address as a port security authorized address on ports 1-20 Explanation/Reference:NO.25 Refer to the exhibit.Switch-1 and Switch-2 are configured to provide VRRP in VLAN 2. Based on the output, what will happen when a client in VLAN 2 sends an ARP request for its default gateway IP address?  Only Switch-2 will respond, and it will respond with its own MAC address.  Only Switch-2 will respond, and it will respond with the virtual MAC address for VRID 2.  Both Switch-1 and Switch-2 will respond, and both will respond with the virtual MAC address for VRID 2.  Both Switch-1 and Switch-2 will respond, and each will respond with its own MAC Address. NO.26 Refer to the exhibit.An administrator created a backplane stack with the plug-and-play method and did not alter the default backplane stacking settings. Later, two backplane stacking links failed as shown in the exhibit. The network administrator then restored the failed links.When the stack is reformed, which switches become commander and standby?  Member 4 remains commander, and Member 5 remains standby  Member 1 becomes commander, and Member 4 becomes standby  Member 4 remains commander, and Member 1 becomes standby  Member 1 becomes commander, and Member 2 becomes standby NO.27 Refer to the exhibitsExhibit 1Exhibit 2Both Switch-1 and Switch-2 have an OSPF inter-area route to 10.2.0.0/16 with metric 10 in their IP routing table. Switch-3 has the default setting for ECMP. Based on the exhibits, what should the Switch-3 routing table display if the network operates as normal?  no route to 10.2.0.0/16  two routes to 10.2.0.0/16 through both 10.1.0.1 and 10.1.0.5  a route to 10.2.0.0/16 through 10.1.0.5  a route to 10.2.0.0/16 through 10.1.0.1 NO.28 A company has a Unified Communications and Collaboration (UCC) solution.* Users run softphones on their desktops and laptops.* The UCC solution is configured to use a certain range of Layer 4 ports for VoIP traffic.* The user devices connect to AOS-Switches.A network administrator needs to configure the AOS-Switches to prioritize only the VoIP traffic. Where can the administrator configure a DSCP value to meet this goal?  in a global UDP port-based QoS policy  on the interfaces through which the VoIP traffic is forwarded  on the interfaces that connect to the user devices  on the VLAN to which the user devices are assigned Explanation/Reference:NO.29 Refer to the exhibit.Both Switch-1 and Switch-2 redistribute RIP routes into OSPF. The network administrator wants routers in Area 1 to receive the redistributed routes from Switch-1 but not from Switch-2.What should the administrator do to achieve this goal?  Configure Area 1 as a stub area, with no summaries on Switch-2.  Configure Area 1 as a stub area, and import the routes with a low metric on Switch-2.  Configure Area 1 as a Not So Stubby Area (NSSA) on all routing devices in Area 1.  Configure a subnet range for Area 1 on Switch-2, and set the no-advertise option. NO.30 A company deploys AOS-Switches at sites with inexperienced IT staff. The main office network administrators want to monitor thresholds to generate alerts on branch switches.What should be set up for this purpose?  an SNMP trap  an RMON alarm  an auto-config server  an sFlow instance NO.31 Refer to the exhibit.The network administrator wants to summarize routes as much as possible in between areas. What is the correct range to specify for the router OSPF Area 2 command on Switch-2?  10.0.0.0/20  10.0.0.0/21  10.0.8.0/21  10.0.16.0/21 NO.32 A network administrator needs to set up an AOS-Switch to use port-based tunneled node for connected devices.However, the administrator wants the switch to forward traffic without tunneling if it cannot reach a tunneled-node server.What should the administrator do?  Apply the tunneled-node profile to ports, and set the local-switching-fallback option.  Make sure that the switch has an IP address on the untagged VLAN assigned to the ports.  Configure a local switching profile on the Mobility Controller that acts as tunneled-node server.  Set the switch to role-based tunneled node, and make sure it uses the default initial user role. NO.33 Refer to the exhibits.Exhibit 1.Exhibit 2.The exhibits show the current operational state for routes on Switch-3 to send all traffic to 172.16.0.0/16 through Switch-2 during normal operation.Which single configuration change creates the desired behavior?  Set a cost of 100 in the redistribute static command on Switch-2 to change the external LSA metric.  Change the OSPF external metric type to 1 on Switch-1, and set a cost of 100 on Switch-3 VLAN 104.  Change the OSPF external metric type to 1 on Switch-1, and set a cost of 100 on Switch-3 VLAN 108.  Set a cost of 100 in the redistribute static command on Switch-1 to change the external LSA metric. NO.34 Refer to the exhibit.Switch-2, Switch-5, and Switch-6 currently have many OSPF routes to Area 1 networks. The network administrator wants to replace these routes with a single aggregated route to 10.1.0.0/16 on each switch.Where should the administrator specify the 10.1.0.0/16 range?  in the Switch-2 OSPF Area 2 configuration  in the Switch-1 OSPF Area 0 configuration  in the Switch-1 OSPF Area 1 configuration  in the Switch-2, Switch-5, and Switch-6 OSPF global configuration NO.35 Refer to the exhibit.The routing switches shown in the exhibit run OSPF on the links between each other. The commander in the Switch-1 VSF fabric goes down. Traffic is disrupted for several seconds.What should a network administrator do to support a faster failover in a similar situation?  Configure echo mode BFD on the VLAN that connects Switch-1 and Switch-2.  Add VRRP on the VLAN between Switch-1 and Switch-2.  Configure graceful restart, or nonstop OSPF, on Switch-1 and Switch-2, with a proper timer.  Create a redundant virtual link between Switch-1 and Switch-2. NO.36 AOS-Switch runs IGMP in data-driven mode. What behavior does it exhibit?  It drops multicasts destined to groups that have no members  It preempts the querier role even if another device has higher priority  It floods multicasts on all ports in the VLAN if the group has at least one member  It disables automatic fast leave on ports that connect to a single device  Loading … 100% Free HPE6-A45 Files For passing the exam Quickly: https://www.examcollectionpass.com/HP/HPE6-A45-practice-exam-dumps.html --------------------------------------------------- Images: https://free.examcollectionpass.com/wp-content/plugins/watu/loading.gif https://free.examcollectionpass.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2023-12-14 11:02:11 Post date GMT: 2023-12-14 11:02:11 Post modified date: 2023-12-14 11:02:11 Post modified date GMT: 2023-12-14 11:02:11