[2024] Use Valid H35-580_V2.0 Exam - Actual Exam Question & Answer [Q12-Q33]

Rate this post

[2024] Use Valid H35-580_V2.0 Exam – Actual Exam Question & Answer

Test Engine to Practice H35-580_V2.0 Test Questions

Huawei H35-580_V2.0 (HCIA-5G-RNP&RNO V2.0) Certification Exam is ideal for professionals who are interested in working with 5G networks. It is also suitable for those who want to advance their careers in the field of network planning and optimization. HCIA-5G-RNP&RNO V2.0 certification is recognized globally and is highly valued by companies that work with 5G technology.

Huawei H35-580_V2.0 (HCIA-5G-RNP&RNO V2.0) exam is an important certification for network engineers who are looking to validate their skills in 5G Radio Network Planning and Optimization. H35-580_V2.0 exam covers a wide range of topics related to 5G networks, including network planning and optimization, network architecture, network security, and troubleshooting. Obtaining this certification can be a valuable asset for network engineers who want to advance their careers and stay up-to-date with the latest 5G technologies.

QUESTION 12
After gNodeB hardware is installed and commissioned, which of the following functions needs to be tested and verified in single site verification?

Interoperability capability

SON capability

Equipment functions and coverage capability

Call drop capability

QUESTION 13
Which of the following boards support CPU usage query?(Select All that Apply)

FAN

UPEU

UMPT

UBBP

QUESTION 14
Which of the following channels/signals require demodulation reference signals (DMRSs)?(Select All that Apply)

DPBCH

DPDCCH

DPOSCH

DCSI-RS

QUESTION 15
In the cell search process in 5G SA, a UE completes frame synchronization after reading the SS.

True

False

QUESTION 16
Which of the following channels is used to send uplink power control commands?

POSCH

PUCCH

PDCCH

PUSCH

QUESTION 17
CU-DU Split of a base station means that the base station’s control plane functions and user plane functions are separated.

True

False

QUESTION 18
Which of the following spectrum sharing technologies can be used in the 3.5 GHz+2.1 GHz uplink and downlink decoupling/super uplink architecture?

3.5 GHz NR and 2.1 GHz LTE share both the downlink and uplink spectrums.

2.1 GHz NR and 2.1 GHz LTE share both the downlink and uplink spectrums.

3.5 GHz NR and 2.1 GHz LTE only share the uplink spectrums.

2.1 GHz NR and 2.1 GHz LTE only share the uplink spectrums.

QUESTION 19
Which of the following protocols/data belong to Layer 3 of the Uu interface?(Select All that Apply)

MAC protocol

RLC protocol

RRC protocol

IP data

QUESTION 20
Which of the following statements about link budget parameters is incorrect?

The higher the edge service rate, the lower the required SINR demodulation threshold.

The interference margin is relatively small on high frequency bands.

The shadow fading margin is related to the edge coverage rate.

The antenna gain of the 64T64R A All is approximately 24 dBi.

QUESTION 21
In downlink peak rate testing, the modulation and coding scheme (MCS) index must reach 32.

True

False

QUESTION 22
Which of the following are common causes of overshoot coverage?(Select All that Apply)

Reflection in a large amount of water.

The transmit power of a base station is too high.

Signals travel far along a street due to the waveguide effect.

The height of the antenna or AAU is too low.

QUESTION 23
The PCFICH and PHICH channels have been deleted from the physical layer in 5G compared with LTE.

True

False

QUESTION 24
What are characteristics of eCPRI links?(Select All that Apply)

They are based on the TDM mechanism.

They require dock synchronization.

They are based on the IP mechanism.

They require AAU support.

QUESTION 25
Under the same gNodeB, an NR TDD cell supports the same maximum number of RRC_CONNECTED UEs as an NR FDD cell.

True

False

QUESTION 26
In SA networking, which of the following is the first step for a UE to perform a cell search?

Obtain the cell signal quality.

Obtain other cell information.

Synchronize frames and obtain PCI group number.

Synchronize half-frames and obtain the ID within a PCI group.

Explanation
According to the 5G SA Cell Search & Network Entry Matrix, the first step for a UE to perform a cell search in SA networking is to synchronize frames and obtain PCI group number. This step involves the following sub-steps:
The UE scans the available frequency range to detect the presence of Synchronization Signal Blocks (SSBs) from different base stations. SSBs are periodic signals that contain essential synchronization and system information for cell search and initial access.
The UE selects an SSB with the strongest signal strength and decodes its Primary Synchronization Signal (PSS) and Secondary Synchronization Signal (SSS). The PSS and SSS are part of the SSB and provide coarse timing synchronization and cell identity information.
The UE uses the PSS and SSS information to synchronize its internal clock with that of the base station and obtain the Physical Cell Identity (PCI) group number. The PCI group number is a 9-bit value that identifies a group of 8 cells that share the same PSS and SSS sequences. The PCI group number ranges from 0 to 1007.
The other steps for a UE to perform a cell search in SA networking are:
Synchronize half-frames and obtain the ID within a PCI group: The UE further synchronizes its timing with the base station by decoding its Narrowband Synchronization Signal (NSSS), which is also part of the SSB. The NSSS provides more precise timing information and the ID within a PCI group, which is a
3-bit value that identifies a specific cell within a PCI group. The ID within a PCI group ranges from 0 to
7. By combining the PCI group number and the ID within a PCI group, the UE can obtain the full PCI, which is a 10-bit value that uniquely identifies a cell.
Obtain other cell information: The UE decodes other signals and channels in the SSB to acquire other cell information, such as system bandwidth, subcarrier spacing, frame structure, etc. These signals and channels include Demodulation Reference Signals (DMRS), Master Information Block (MIB), System Information Block (SIB), etc.
Obtain the cell signal quality: The UE measures the cell signal quality based on various indicators, such as Reference Signal Received Power (RSRP), Reference Signal Received Quality (RSRQ), Signal-to-Interference-plus-Noise Ratio (SINR), etc. These indicators reflect the strength, quality, and interference level of the received signal.

QUESTION 27
Which of the following are the cause values of QoS flow setup failures?(Select All that Apply)

No response from the UE

Insufficient transmission resources

Unauthorized UE

Insufficient radio resources

QUESTION 28
Which of the following is not covered by a site survey?

Antenna installation space

Equipment room space and load bearing capacity

Models of hardware boards on base stations

Site location

QUESTION 29
Which of the following events is used by the gNodeB to trigger a blind redirection procedure?

QUESTION 30
In the uplink rate test for NR users, which of the following values is the recommended uplink maximum MIMO layers for 2T4R UEs?

Layer3

Layer2

Layer4

Layer1

QUESTION 31
Slot distribution in BBU5900 is the same as that in BBU3910.

True

False

QUESTION 32
If AFGIobal is 15 kHz, FREF-Offs is 3000 MHz, and NREF-Offs is 600000, which of the following is the NR Absolute Radio Frequency Channel Number (NR-ARFCN) corresponding to 3300 MHz?

633000

600000

3300000

620000

QUESTION 33
Which of the following statistics are provided by the Probe’s BLER statistics menu?(Select All that Apply)

DIBLER

DRBLER

Modulation scheme

Retransmission ratio