This page was exported from Free Exam Dumps Collection [ http://free.examcollectionpass.com ] Export date:Wed Nov 27 19:30:13 2024 / +0000 GMT ___________________________________________________ Title: Practice with JN0-637 Dumps for JNCIP-SEC Certified Exam Questions & Answer [Q13-Q36] --------------------------------------------------- Practice with JN0-637 Dumps for JNCIP-SEC Certified Exam Questions & Answer REAL JN0-637 Exam Questions With 100% Refund Guarantee NEW QUESTION 13You are asked to detect domain generation algorithmsWhich two steps will accomplish this goal on an SRX Series firewall? (Choose two.)  Define an advanced-anti-malware policy under [edit services].  Attach the security-metadata-streaming policy to a security  Define a security-metadata-streaming policy under [edit  Attach the advanced-anti-malware policy to a security policy. NEW QUESTION 14What is the purpose of the Switch Microservice of Policy Enforcer?  to isolate infected hosts  to enroll SRX Series devices with Juniper ATP Cloud  to inspect traffic for malware  to synchronize security policies to SRX Series devices NEW QUESTION 15You are connecting two remote sites to your corporate headquarters site.You must ensure that all traffic is secured and sent directly between sites In this scenario, which VPN should be used?  IPsec ADVPN  hub-and-spoke IPsec VPN  Layer 2 VPN  full mesh Layer 3 VPN with EBGP NEW QUESTION 16You are deploying a virtualization solution with the security devices in your network Each SRX Series device must support at least 100 virtualized instances and each virtualized instance must have its own discrete administrative domain.In this scenario, which solution would you choose?  VRF instances  virtual router instances  logical systems  tenant systems NEW QUESTION 17You are required to secure a network against malware. You must ensure that in the event that a compromised host is identified within the network.In this scenario after a threat has been identified, which two components are responsible for enforcing MAC-level infected host?  SRX Series device  Juniper ATP Appliance  Policy Enforcer  EX Series device You are required to secure a network against malware. You must ensure that in the event that a compromised host is identified within the network, the host is isolated from the rest of the network.In this scenario, after a threat has been identified, the two components that are responsible for enforcing MAC-level infected host are:C) Policy Enforcer. Policy Enforcer is a software solution that integrates with Juniper ATP Cloud and Juniper ATP Appliance to provide automated threat remediation across the network. Policy Enforcer can receive threat intelligence feeds from Juniper ATP Cloud or Juniper ATP Appliance and apply them to the security policies on the SRX Series devices and the EX Series devices. Policy Enforcer can also enforce MAC-level infected host, which is a feature that allows you to quarantine a compromised host by blocking its MAC address on the switch port. Policy Enforcer can communicate with the EX Series devices and instruct them to apply the MAC-level infected host policy to the infected host1.D) EX Series device. EX Series devices are Ethernet switches that can provide Layer 2 and Layer 3 switching capabilities and security features. EX Series devices can integrate with Policy Enforcer and Juniper ATP Cloud or Juniper ATP Appliance to provide automated threat remediation across the network. EX Series devices can support MAC-level infected host, which is a feature that allows them to quarantine a compromised host by blocking its MAC address on the switch port. EX Series devices can receive instructions from Policy Enforcer and apply the MAC-level infected host policy to the infected host2.The other options are incorrect because:A) SRX Series device. SRX Series devices are high-performance firewalls that can provide Layer 3 and Layer 4 security features and integrate with Juniper ATP Cloud or Juniper ATP Appliance to provide advanced threat prevention. SRX Series devices can receive threat intelligence feeds from Juniper ATP Cloud or Juniper ATP Appliance and apply them to the security policies. However, SRX Series devices cannot enforce MAC-level infected host, which is a feature that requires Layer 2 switching capabilities and is supported by EX Series devices3.B) Juniper ATP Appliance. Juniper ATP Appliance is a hardware solution that provides advanced threat prevention by detecting and blocking malware, ransomware, and other cyberattacks. Juniper ATP Appliance can analyze the network traffic and identify the compromised hosts based on their behavior and communication patterns. Juniper ATP Appliance can also send threat intelligence feeds to Policy Enforcer and SRX Series devices to enable automated threat remediation across the network. However, Juniper ATP Appliance cannot enforce MAC-level infected host, which is a feature that requires Layer 2 switching capabilities and is supported by EX Series devices.Reference: Policy Enforcer Overview EX Series Switches OverviewSRX Series Services Gateways Overview [Juniper ATP Appliance Overview]NEW QUESTION 18ExhibitWhich two statements are correct about the output shown in the exhibit? (Choose two.)  The packet is processed as host inbound traffic.  The packet matches the default security policy.  The packet matches a configured security policy.  The packet is processed in the first path packet flow. NEW QUESTION 19To analyze and detect malware, Juniper ATP Cloud performs which two functions? (Choose two.)  cache lookup: to see if the file is seen already and known to be malicious  antivirus scan: with a single vendor solution to see if the file contains any potential threats  dynamic analysis: to see what happens if you execute the file in a real environment  static analysis: to see what happens if you execute the file in a real environment NEW QUESTION 20ExhibitReferring to the exhibit, which two statements are true? (Choose two.)  The data that traverses the ge-0/070 interface is secured by a secure association key.  The data that traverses the ge-070/0 interface can be intercepted and read by anyone.  The data that traverses the ge-070/0 interface cannot be intercepted and read by anyone.  The data that traverses the ge-O/0/0 interface is secured by a connectivity association key. NEW QUESTION 21you must find an infected host and where the aack came from using the Juniper ATP Cloud.Which two monitor workspaces will return the requested information? (Choose Two)  Hosts  File Scanning  Threat Sources  Encrypted Traffic To find an infected host and where the attack came from using the Juniper ATP Cloud, you need to use the Hosts and Threat Sources monitor workspaces.The other options are incorrect because:B) The File Scanning monitor workspace shows the files that have been scanned by the Juniper ATP Cloud and their verdicts (clean, malicious, or unknown). It does not show the infected hosts or the attack sources1.D) The Encrypted Traffic monitor workspace shows the encrypted traffic that has been decrypted by the Juniper ATP Cloud and the certificates that have been used. It does not show the infected hosts or the attack sources2.Therefore, the correct answer is A and C. You need to use the Hosts and Threat Sources monitor workspaces to find an infected host and where the attack came from using the Juniper ATP Cloud.To do so, you need to perform the following steps:For Hosts, you need to access the Hosts monitor workspace in the Juniper ATP Cloud WebUI by selecting Monitor > Hosts. You can see the list of hosts that have been detected by the Juniper ATP Cloud and their risk scores, infection levels, and threat categories. You can filter the hosts by various criteria, such as IP address, hostname, domain, or threat category. You can also drill down into each host to see the details of the files, applications, and incidents associated with the host. You can identify the infected host by looking for the host with the highest risk score, infection level, or threat category3.For Threat Sources, you need to access the Threat Sources monitor workspace in the Juniper ATP Cloud WebUI by selecting Monitor > Threat Sources. You can see the list of threat sources that have been detected by the Juniper ATP Cloud and their risk scores, threat categories, and geolocations.You can filter the threat sources by various criteria, such as IP address, domain, or threat category.You can also drill down into each threat source to see the details of the files, applications, and incidents associated with the threat source. You can identify the attack source by looking for the threat source with the highest risk score, threat category, or geolocation that matches the infected host.Reference: File ScanningEncrypted TrafficHosts[Threat Sources]NEW QUESTION 22Refer to the exhibit,which two potential violations will generate alarm ? (Choose Two)  the number of policy violations by a source network identifier  the ratio of policy violation traffic compared to accepted traffic.  the number of policy violation by a destination TCP port  the number of policy violation to an application within a specified period The exhibit shows a security policy configuration with a threshold of 1000 policy violations by a source network identifier and a threshold of 10 policy violations to an application within a specified period. If either of these thresholds are exceeded, an alarm will be generated. Therefore, the correct answer is A and D. The other options are incorrect because:B) The ratio of policy violation traffic compared to accepted traffic is not a criterion for triggering an alarm.The security policy configuration does not specify any ratio or percentage of policy violation traffic that would cause an alarm.C) The number of policy violation by a destination TCP port is also not a criterion for triggering an alarm.The security policy configuration does not specify any threshold or duration for policy violation by a destination TCP port.Reference: policy (Security Alarms)Monitoring Security Policy ViolationsNEW QUESTION 23What are two important function of the Juniper Networks ATP appliance solution? (Choose two.).  Statistics  Analysis  Detection  Filtration https://www.juniper.net/us/en/products-services/security/advanced-threat-prevention/NEW QUESTION 24You want to use selective stateless packet-based forwarding based on the source address.In this scenario, which command will allow traffic to bypass the SRX Series device flow daemon?  set firewall family inet filter bypas3_flowd term t1 then virtual-channel stateless  set firewall family inet filter bypass__f lowd term t1 then packet-mode  set firewall family inet filter bypass_flowd term t1 then routing-instance stateless  set firewall family inet filter bypaa3_flowd term t1 then skip-services accept NEW QUESTION 25You are asked to determine if the 203.0.113.5 IP address has been added to the third-party security feed, DS hield, from Juniper Seclnte1. You have an SRX Series device that is using Seclnte1 feeds from Juniper ATP Cloud Which command will return this information?  show security dynamic-address category-name CC | match 203.0.113.5  show security dynamic-address category-name Infected-Hosts | match 203.0.113.5  show security dynamic-address category-name IPFilter I match 203.0.113.5  show Security dynamic-address category-name JWAS | match 203.0.113.5 NEW QUESTION 26You configured a chassis cluster for high availability on an SRX Series device and enrolled this HA cluster with the Juniper ATP Cloud.Which two statements are correct in this scenario? (Choose two.)  You must use different license keys on both cluster nodes.  When enrolling your devices, you only need to enroll one node.  You must set up your HA cluster after enrolling your devices with Juniper ATP Cloud  You must use the same license key on both cluster nodes. NEW QUESTION 27ExhibitWhich two statements are correct about the output shown in the exhibit? (Choose two.)  The packet is silently discarded.  The packet is part of an existing session.  The packet is part of a new session.  The packet is explicitly rejected. NEW QUESTION 28ExhibitThe highlighted incident (arrow) shown in the exhibit shows a progression level of “Download” in the kill chain.What are two appropriate mitigation actions for the selected incident? (Choose two.)  Immediate response required: Block malware IP addresses (download server or CnC server)  Immediate response required: Wipe infected endpoint hosts.  Immediate response required: Deploy IVP integration (if configured) to confirm if the endpoint has executed the malware and is infected.  Not an urgent action: Use IVP to confirm if machine is infected. NEW QUESTION 29You issue the command shown in the exhibit.Which policy will be active for the identified traffic?  Policy p4  Policy p7  Policy p1  Policy p12 NEW QUESTION 30ExhibitReferring to the exhibit, which statement is true?  This custom block list feed will be used before the Juniper Seclntel  This custom block list feed cannot be saved if the Juniper Seclntel block list feed is configured.  This custom block list feed will be used instead of the Juniper Seclntel block list feed  This custom block list feed will be used after the Juniper Seclntel block list feed. NEW QUESTION 31ExhibitWhich two statements are correct about the output shown in the exhibit. (Choose two.)  The source address is translated.  The packet is an SSH packet  The packet matches a user-configured policy  The destination address is translated. NEW QUESTION 32Which two types of source NAT translations are supported in this scenario? (Choose two.)  translation of IPv4 hosts to IPv6 hosts with or without port address translation  translation of one IPv4 subnet to one IPv6 subnet with port address translation  translation of one IPv6 subnet to another IPv6 subnet without port address translation  translation of one IPv6 subnet to another IPv6 subnet with port address translation NEW QUESTION 33You want to identify potential threats within SSL-encrypted sessions without requiring SSL proxy to decrypt the session contents.Which security feature achieves this objective?  infected host feeds  encrypted traffic insights  DNS security  Secure Web Proxy NEW QUESTION 34Click the Exhibit button.Which type of NAT is shown in the exhibit?  NAT46  NAT64  persistent NAT  DS-Lite NEW QUESTION 35Your organization has multiple Active Directory domain to control user access. You must ensure that security polices are passing traffic based upon the user’s access rights.What would you use to assist your SRX series devices to accomplish this task?  JIMS  Junos Space  JSA  JATP Appliance https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-user-auth-configure- jims.htmlNEW QUESTION 36ExhibitThe exhibit shows a snippet of a security flow trace.In this scenario, which two statements are correct? (Choose two.)  This packet arrived on interface ge-0/0/4.0.  Destination NAT occurs.  The capture is a packet from the source address 172.20.101.10 destined to 10.0.1.129.  An existing session is found in the table.  Loading … PDF Download Juniper Test To Gain Brilliante Result!: https://www.examcollectionpass.com/Juniper/JN0-637-practice-exam-dumps.html --------------------------------------------------- Images: https://free.examcollectionpass.com/wp-content/plugins/watu/loading.gif https://free.examcollectionpass.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2024-11-17 14:03:22 Post date GMT: 2024-11-17 14:03:22 Post modified date: 2024-11-17 14:03:22 Post modified date GMT: 2024-11-17 14:03:22