Get Real NCP-BC Quesions Pass Nutanix Certification Exams Easily [Q60-Q78]

Rate this post

Get Real NCP-BC Quesions Pass Nutanix Certification Exams Easily

NCP-BC Dumps are Available for Instant Access

Nutanix NCP-BC Exam Syllabus Topics:

Topic	Details
Topic 1	Troubleshoot Business Continuity & Disaster Recovery (BCDR) Failures: Covers diagnosing and resolving DR failures related to network issues, replication errors, third-party backup problems, and misconfigured DR setups.
Topic 2	Perform Business Continuity & Disaster Recovery (BCDR) Tasks: Covers hands-on execution of DR operations including self-service restores, snapshot recovery, failover tasks, post-failover cleanup, and migrating from legacy protection domains to modern protection policies.
Topic 3	Interpret and Configure Business Continuity & Disaster Recovery (BCDR) Requirements: Covers planning and configuring DR solutions by evaluating RPO needs, resource limits, security settings, recovery plans, and network storage requirements across various Nutanix environments.
Topic 4	Test Business Continuity & Disaster Recovery (BCDR) Solutions: Covers validating DR readiness by executing planned and unplanned failovers, testing connectivity and throughput between sites, and verifying recovery plan accuracy.

NEW QUESTION 60
What snapshot recovery point interval does Self-Service Restore support in a Nearsync setup?

15 minutes

30 minutes

1 hour

4 hours

NEW QUESTION 61
An administrator wants to run a test failover and maps the primary production virtual network to the recovery site production virtual network for the test.
What are the two most likely outcomes? (Choose two.)

Test failover can overlap with production networking and can lead to IP conflicts.

Using production networks on recovery AZ for test failover provides the most accurate validation.

It defeats the intended isolation between production and test workflows.

Test failover does not require network mapping, so the selection of production or test networks will have no impact.

NEW QUESTION 62
A Protection Policy is configured with a Nearsync replication schedule (15-minute RPO). An administrator observes that the system has temporarily transitioned to an hourly replication schedule.
Which scenario would cause this automatic transition from Nearsync to Asynchronous (hourly) replication?

The Nutanix Cloud Infrastructure license expired.

The bandwidth is insufficient for the change rate.

A new VM was added to the protection category, triggering a full initial sync.

A Test Failover operation is currently running on the recovery site.

NEW QUESTION 63
An administrator configures a VM-VM Anti-Affinity policy for a web application cluster to ensure high availability. The application is protected by a Protection Policy in Prism Central. A failover occurs, moving the VMs to the recovery site.
What determines whether the VM-VM Anti-Affinity rules are active on the recovery site?

The rules are inactive because Anti-Affinity policies are not supported in Prism Central-based DR.

The rules are active only if the corresponding Anti-Affinity Policy exists on the recovery site.

The rules are automatically active because Anti-Affinity policies are intrinsic to the VM metadata replicated by Cerebro.

The rules are active only if the “Enforce Anti-Affinity” checkbox is selected in the Recovery Plan.

NEW QUESTION 64
An administrator plans to migrate guest VMs from a legacy Protection Domain-based DR plan to the Prism Central-based Disaster Recovery solution.
What should be done first before removing the legacy protection domains?

Delete all legacy snapshots associated with the Protection Domains.

Migrate the VMs from Protection Domains to Protection Policies.

Recreate recovery plans in Prism Element.

Perform a planned failover to the recovery AZ.

NEW QUESTION 65
An administrator is migrating from a Protection Domain-based deployment to a Prism Central (PC)-based deployment What occurs if a snapshot is deleted before the protection policy is applied to the migrated entities?

PC automatically recreates the deleted snapshot using the new configuration.

The recovery points associated with that snapshot won’t be available for the deployment.

PC pauses the migration until the snapshot is manually restored from a backup.

The migration will automatically fail and will revert all entities to the original Protection Domain.

NEW QUESTION 66
An administrator notices that the link between the source and destination clusters gets overutilized during recovery point replication. The company secured a new 10G connection between the two clusters.
What configuration should the administrator use so that the replication traffic uses the new 10G link?

Configure Flow Rules.

Configure Network Segmentation for DR.

Configure Network Segmentation for Volumes.

Configure Backplane Network.

NEW QUESTION 67
An administrator has set up asynchronous replication between the Marseille and Paris clusters for the VMs in the FIN-PROD storage container. After a planned production failover from Paris to Marseille, the administrator noticed that the VMs were scattered across all the storage containers in the Marseille cluster.
Which statement is true regarding this scenario?

The recovery plan did not contain a valid network mapping.

The recovery plan did not contain a valid storage mapping.

The FIN-PROD storage container does not exist on Marseille cluster.

A storage policy is setup on the Paris cluster and missing on the Marseille cluster.

NEW QUESTION 68
An administrator enables network segmentation for Disaster Recovery on a primary cluster to isolate replication traffic. The primary and recovery clusters are in a “brownfield” configuration, meaning the recovery cluster does not yet have network segmentation enabled.
How is the configuration of the recovery cluster handled in this scenario?

The system automatically reconfigures the recovery cluster using the new virtual IP address communicated by the primary cluster.

The recovery cluster rejects the connection until the firewall rules on the recovery site are manually updated to allow traffic on port 3260.

The system creates a temporary VPN tunnel between the interface eth0 of the recovery cluster and ntnx0 of the primary cluster.

The administrator must manually enable network segmentation on the recovery cluster.

NEW QUESTION 69
An administrator recently expanded a Nutanix cluster by adding several new nodes. Shortly after, multiple backup jobs began failing.
The following error is consistently reported:
Failed to perform backup: Cannot complete process ‘iscsiadm –mode discovery –type sendtargets –portal X.X.X.X’ within timeout What is the most likely cause of the failure?

Firewall ports 3502 and 3620 are missing to the new nodes.

Firewall ports 3202 and 3206 are missing to the new nodes.

Firewall ports 3302 and 3360 are missing to the new nodes.

Firewall ports 3205 and 3260 are missing to the new nodes.

NEW QUESTION 70
A company’s two clusters are part of the same availability zone. Prism Central, which holds the protection policy configuration and recovery plans, is located on Cluster A and protected by the Prism Central Backup and Restore mechanism.
What is the first step to take to execute a disaster recovery plan on the datacenter hosting Cluster A?

Restore the Prism Central instance from Prism Element on the surviving cluster.

Deploy a new Prism Central instance on the surviving cluster and register the cluster to it to access the replicated VM snapshots.

Log into Prism Element on the surviving cluster and execute the Recovery Plan.

Access the Prism Central web interface via its Floating IP to trigger the “Unplanned Failover” workflow for the affected VMs.

NEW QUESTION 71
An administrator plans to configure Cross Hypervisor Disaster Recovery (CHDR) to replicate VMs from an ESXi cluster to an AHV cluster using an Asynchronous replication schedule.
Which component must be installed on the VMs to ensure successful migration and driver configuration during recovery?

VirtIO Drivers manually installed

Pre-freeze scripts

VMware Tools only

Nutanix Guest Tools (NGT)

NEW QUESTION 72
An administrator performs these steps while configuring Nutanix Disaster Recovery:
Create VMs on Site A in a container named SalesA
Create a new container on Site B named SalesB
Create new Protection Policy name Async
Place all the new Sales VMs in the Protection Policy named Async
Set a schedule to begin taking hourly snapshots immediately
After performing the steps, replications begin without any errors. After two hours, the administrator checks on the progress on the remote site and finds that the SalesB container is showing 0 bytes.
What went wrong?

Advanced Replication add-on license isn’t applied.

The same name must be used at both sites.

The Sales VMs are unsupported for replications.

The schedule is a Nearsync schedule.

NEW QUESTION 73
An administrator is managing a mission-critical Inventory-VM that is part of a Protection Domain (PD) named PD_Production.
Monday: A scheduled snapshot of PD_Production is successfully taken.
Tuesday: Due to a configuration error during a cleanup task, the administrator accidentally removes Inventory-VM from the PD_Production Protection Domain. The VM continues to run, but it is no longer being snapped or replicated.
Wednesday: A database corruption occurs on Inventory-VM. The administrator finds the local snapshot from Monday and performs an In-place Restore (Revert) to recover the data.
Following the successful completion of the In-place Restore, what is the status of Inventory-VM regarding its data protection?

The VM is restored, but it is placed into a new, system-generated PD named Restored_Entities.

The VM is restored to Monday’s data state and is automatically added back into the PD.

The VM is restored to Monday’s data state but remains outside of any PD.

The restore fails because the VM is no longer a member of the PD that owns the snapshot.

NEW QUESTION 74
An administrator is planning a scheduled maintenance window that will temporarily interrupt network connectivity between the primary and recovery sites. Several Tier 1 VMs are protected with a Synchronous replication Protection Policy.
What must the administrator do before beginning the maintenance window to prevent these VMs from becoming unresponsive without making RPO changes?

Execute an Unplanned Failover to move the VMs to the recovery site before the maintenance window begins.

Manually pause Synchronous replication in Prism Central before the maintenance window begins.

Change the Protection Policy from Synchronous to Asynchronous replication prior to the maintenance window.

Update the Synchronous replication policy to enable manual failover handling.

NEW QUESTION 75
An administrator is tasked with ensuring the VMs do not experience downtime during an upcoming network maintenance on the primary cluster. The VMs are protected by a Protection Policy and are configured under a Recovery Plan.
What failover mechanism should the administrator use to ensure the VMs are available on the target cluster before the maintenance window?

Unplanned Failover

Planned Failover

Validate the Recovery Plan

Test Failover

NEW QUESTION 76
An administrator intends to configure a NearSync replication schedule with a 15-minute Recovery Point Objective (RPO) on a hybrid 3-node cluster. The current nodes in the cluster are configured with one SSD and four HDDs each.
Which cost-effective modification is required to support this specific replication schedule?

Replace the HDDs with NVMe drives to support the IOPS requirement.

Configure the cluster with a minimum of four nodes.

Increase the Controller VM (CVM) memory to 64 GB.

Add a second SSD to each node to meet the minimum requirement.

NEW QUESTION 77
An administrator is preparing to configure DR between an on-prem AZ and Nutanix Cloud AZ. Replication fails immediately after configuration.
Which prerequisite should be verified?

The clusters are running identical hypervisors.

Both clusters have external IP addresses.

Deduplication is disabled.

Synchronous replication is configured.

NEW QUESTION 78
An administrator plans on performing a failover of a VM from a source cluster to a DR cluster. The administrator needs the VM’s IP address preserved after failover.
In what scenario is the VM’s IP address preserved?

Use unique networks for source and destination networks.

The IP address is always preserved, no additional configuration required.

The gateway and subnet mask are left empty in the network mapping.

The source and destination network subnet must be stretched.