[Sep 18, 2026] Uplift Your FCP_FGT_AD-7.6 Exam Marks With The Help of FCP_FGT_AD-7.6 Dumps [Q60-Q79]

Rate this post

[Sep 18, 2026] Uplift Your FCP_FGT_AD-7.6 Exam Marks With The Help of FCP_FGT_AD-7.6 Dumps

Use Fortinet FCP_FGT_AD-7.6 Dumps To Succeed Instantly in FCP_FGT_AD-7.6 Exam

Fortinet FCP_FGT_AD-7.6 Exam Syllabus Topics:

Topic	Details
Topic 1	Firewall policies and authentication: This section of the exam measures the skills of firewall administrators and covers the implementation and management of security policies. It involves configuring basic and advanced firewall rules, applying Source NAT (SNAT) and Destination NAT (DNAT) options, and enforcing various firewall authentication methods. The section also includes deploying and configuring Fortinet Single Sign-On (FSSO) to streamline user access across the network.
Topic 2	Routing: This section of the exam measures the skills of firewall administrators and covers the configuration of routing features on FortiGate devices. It includes defining and applying static routes for directing traffic within and outside the network, as well as setting up Software-Defined WAN (SD-WAN) to distribute and balance traffic loads across multiple WAN connections efficiently.
Topic 3	Content inspection: This section of the exam measures the skills of network security engineers and covers the setup and management of content inspection features on FortiGate. Candidates must demonstrate an understanding of encrypted traffic inspection using digital certificates, identify and apply FortiGate inspection modes, and configure web filtering policies. The ability to implement application control for monitoring and regulating network application usage, configure antivirus profiles to detect and block malware, and set up Intrusion Prevention Systems (IPS) to shield the network from threats and vulnerabilities is also assessed.
Topic 4	VPN: This section of the exam measures the skills of network security engineers and covers the configuration and deployment of Virtual Private Network (VPN) solutions. Candidates are required to implement SSL VPNs to grant secure remote access to internal resources and configure IPsec VPNs in either meshed or partially redundant topologies to ensure encrypted communication between distributed network locations.
Topic 5	Deployment and system configuration: This section of the exam measures the skills of network security engineers and covers essential tasks for setting up a FortiGate device in a production environment. Candidates are expected to perform the initial configuration, establish basic connectivity, and integrate the device within the Fortinet Security Fabric. They must also be able to configure a FortiGate Cluster Protocol (FGCP) high availability setup and troubleshoot resource and connectivity issues to ensure system readiness and network uptime.

NO.60 Refer to the exhibit. An administrator has configured an Application Overrides for the ABC.Com application signature and set the Action to Allow. This application control profile is then applied to a firewall policy that is scanning all outbound traffic. Logging is enabled in the firewall policy. To test the configuration, the administrator accessed the ABC.Com web site several times.

Why are there no logs generated under security logs for ABC.Com?

The ABC.Com Type is set as Application instead of Filter.

The ABC.Com is configured under application profile, which must be configured as a web filter profile.

The ABC.Com Action is set to Allow.

The ABC.Com is hitting the category Excessive-Bandwidth.

NO.61 What are two features of collector agent advanced mode? (Choose two.)

Advanced mode supports nested or inherited groups.

In advanced mode, security profiles can be applied only to user groups, not individual users.

In advanced mode, FortiGate can be configured as an LDAP client and group filters can be configured on FortiGate.

Advanced mode uses the Windows convention – NetBios: DomainUsername.

NO.62 The HTTP inspection process in web filtering follows a specific order when multiple features are enabled in the web filter profile.
Which order must FortiGate use when the web filter profile has features such as safe search enabled?

DNS-based web filter and proxy-based web filter

Static URL filter, FortiGuard category filter, and advanced filters

FortiGuard category filter and rating filter

Static domain filter, SSL inspection filter, and external connectors filters

NO.63 What are two characteristics of HA cluster heartbeat IP addresses in a FortiGate device?
(Choose two.)

Heartbeat interfaces have virtual IP addresses that are manually assigned.

Heartbeat IP addresses are used to distinguish between cluster members.

The heartbeat interface of the primary device in the cluster is always assigned IP address
169.254.0.1.

A change in the heartbeat IP address happens when a FortiGate device joins or leaves the cluster.

NO.64 Which three strategies are valid SD-WAN rule strategies for member selection? (Choose three.)

Lowest Cost (SLA) without load balancing

Manual with load balancing

Lowest Quality (SLA) with load balancing

Lowest Cost (SLA) with load balancing

Best Quality with load balancing

NO.65 FortiGate is operating in NAT mode and has two physical interfaces connected to the LAN and DMZ networks respectively.
Which two statements about the requirements of connected physical interfaces on FortiGate are true? (Choose two.)

Both interfaces must have the interface role assigned.

Both interfaces must have directly connected routes on the routing table.

Both interfaces must have DHCP enabled and interfaces set to LAN and DMZ roles assigned.

Both interfaces must have IP addresses assigned.

NO.66 You have created a web filter profile named restrict_media-profile with a daily category usage quota. When you are adding the profile to the firewall policy, the restrict_media-profile is not listed in the available web profile drop down.
What could be the reason?

The firewall policy is in no-inspection mode instead of deep-inspection.

The inspection mode in the firewall policy is not matching with web filter profile feature set.

The web filter profile is already referenced in another firewall policy.

The naming convention used in the web filter profile is restricting it in the firewall policy.

NO.67 A network administrator is configuring an IPsec VPN tunnel for a sales employee travelling abroad.
Which IPsec Wizard template must the administrator apply?

Hub-and-Spoke

Site to Site

Remote Access

Dial up User

NO.68 Which three statements explain a flow-based antivirus profile? (Choose three.)

FortiGate buffers the whole file but transmits to the client at the same time.

Flow-based inspection uses a hybrid of the scanning modes available in proxy-based inspection.

If a virus is detected, the last packet is delivered to the client.

Flow-based inspection optimizes performance compared to proxy-based inspection.

The IPS engine handles the process as a standalone.

NO.69 Refer to the exhibits. An administrator creates a new address object on the root FortiGate (HQ- NGFW-1) in the Security Fabric. After synchronization, this object is not available on the downstream FortiGate (HQ-ISFW).
What must the administrator do to synchronize the address object?

Change the csfsetting on HQ-ISFW (downstream) to set configuration-sync local.

Change the csfsetting on HQ-ISFW (downstream) to set saml-configuration-sync default.

Change the csfsetting on HQ-NGFW-1 (root) to set fabric-object-unification default.

Change the csfsetting on both devices to set downstream-access enable.

NO.70 You have configured the FortiGate device for FSSO. A user is successful in log-in to windows, but their access to the internet is denied.
What should the administrator check first?

Whether the user is assigned to the correct AD group.

The FortiGate firewall policy settings for SSL decryption.

The FortiGate FSSO active users list for user’s IP address.

The windows event viewer for failed login attempts.

NO.71 The HTTP inspection process in web filtering follows a specific order when multiple features are enabled in the web filter profile.
Which order must FortiGate use when the web filter profile has features such as safe search enabled?

DNS-based web filter and proxy-based web filter

Static URL filter, FortiGuard category filter, and advanced filters

FortiGuard category filter and rating filter

Static domain filter, SSL inspection filter, and external connectors filters

NO.72 Refer to the exhibit. An administrator has created a new firewall address to use as the destination for a static route. Why is the administrator not able to select the new address in the Destination field of the new static route?

In the new static route, the administrator must select Named Address.

In the new firewall address, the FQDN address must first beresolved.

In the new static route, the administrator must first set the interface to port2.

In the new firewall address, Routing configuration must be enabled.

NO.73 You are analyzing connectivity problems caused by intermediate devices blocking traffic in SSL VPN environment.
In which two ways can you effectively resolve the problem? (Choose two.)

You can turn off IKE fragmentation to fix large certificate negotiation problems.

You should use IPsec to solve issues with fragment drops and large certificate exchanges.

You can use SSL VPN tunnel mode to prevent problems with blocked ESP and UDP ports (500 or
4500).

You can configure a hub-and-spoke topology with SSL VPN tunnels to bypass blocked UDP ports.

NO.74

Refer to the exhibits.
An administrator configured the Web Filter Profile to block access to all social networking sites except Facebook. However, when users try to access Facebook.com, they are redirected to a FortiGuard web filtering block page.
Based on the exhibits, which configuration change must the administrator make to allow Facebook while blocking all other social networking sites?

Change the Feature set of Web Filter Profile as Proxy-based.

Set the Action as Exempt for www.facebook.com in the Static URL Filter.

Change the type as Simple in the Static URL Filter section.

Set the Social Networking action as warning in the FortiGuard Category Based Filter.

NO.75 When configuring firewall policies which of the following is true regarding the policy ID?

It is mandatory to provide a policy ID while creating a firewall policy regardless of GUI or CLI.

A firewall policy ID identifies the order of policy execution in firewall policies.

You can create a policy in CLI with policy ID 0.

A policy ID cannot be edited once a policy is created.

NO.76 Which two statements are correct when FortiGate enters conserve mode? (Choose two.)

FortiGate continues to run critical security actions, such as quarantine.

FortiGate refuses to accept configuration changes.

FortiGate halts complete system operation and requires a reboot to regain available resources.

FortiGate continues to transmit packets without IPS inspection when the fail-open global setting in IPS is enabled.

NO.77 Refer to the exhibits. An administrator configured both members of an HA cluster at the same time. After one week of monitoring, the administrator wants to verify the HA failover performance.
How can the administrator force a failover?

The administrator must reset the HA uptime on HQ-NGFW-1.

The administrator must set the parameter override to enable on HQ-NGFW-2.

The administrator must increase the HA priority on HQ-NGFW-2.

The administrator must set the monitored port to down on HQ-NGFW-1.

NO.78 Refer to the exhibit.

The NOC team connects to the FortiGate GUI with the NOC_Access admin profile. They request that their GUI sessions do not disconnect too early during inactivity.
What must the administrator configure to answer this specific request from the NOC team?

Move NOC_Access to the top of the list to ensure all profile settings take effect.

Increase the offline value of the Override Idle Timeout parameter in the NOC_Access admin profile.

Ensure that all NOC_Access users are assigned the super_admin role to guarantee access

Increase the admintimeout value under config system accprofile NOC_Access.

NO.79 Refer to the exhibit, which contains a RADIUS server configuration.

An administrator added a configuration for a new RADIUS server. While configuring, the administrator enabled Include in every user group.
What is the impact of enabling Include in every user group in a RADIUS configuration?