[Oct-2026] Latest IBM C1000-196 Certification Practice Test Questions [Q43-Q60]

Rate this post

[Oct-2026] Latest IBM C1000-196 Certification Practice Test Questions

Verified C1000-196 Dumps Q&As – 1 Year Free & Quickly Updates

Q43. Scenario: You are planning a deployment of a DataPower appliance that will require robust monitoring of physical devices and high network availability.
Which two considerations should you prioritize when selecting the appropriate form factor? (Choose two)

Ensure the appliance supports intrusion detection for the physical devices connected to it

Choose a form factor that allows for quick installation with minimal configuration requirements

Select a form factor with high redundancy features to minimize downtime during a failure

Opt for a form factor with lower network throughput to reduce energy consumption

Q44. Which of the following best describes the function of an Access Control List (ACL) in DataPower appliance security?

It ensures that only users with specific credentials can access the appliance web interface

It grants all users equal access to all resources on the appliance

It allows only authenticated users to access specific appliance resources based on their IP address

It automatically blocks all incoming network traffic from untrusted sources

Q45. What is the first step in troubleshooting when a service on the DataPower appliance is not responding?

Check the appliance’s resource utilization to ensure no performance bottlenecks

Perform a factory reset to clear potential configuration issues

Reboot the appliance to refresh all settings

Disable all user connections to prevent further interference

Q46. Which of the following system resources are most likely managed differently in the various DataPower appliance form factors?

CPU allocation and network interface bandwidth

Physical device monitoring and network storage capabilities

Power consumption levels and battery backup configurations

Security policies for access control and user management

Q47. In a DataPower appliance, if the CPU utilization reaches 100%, what is the immediate action to take?

Reboot the appliance to refresh all services

Increase the appliance’s resource allocation

Identify and disable non-essential services to free up CPU resources

Ignore the issue if the appliance continues to function properly

Q48. What is the correct procedure for performing a secure backup of the DataPower appliance’s configuration?

Use the backup feature in the web interface and save the file to an external USB drive

Use the CLI to run the backup command and store the backup on a network server

Use the web GUI to export the configurations and save them locally on the appliance

Perform a manual backup using the appliance’s recovery options

Q49. What is the first step in setting up a new DataPower appliance for use in a production environment?

Perform a secure backup to ensure configurations are preserved

Configure the network settings and ensure the appliance has access to the required network

Install the latest firmware update to ensure the appliance is running the latest version

Run a system diagnostic to check for hardware issues

Q50. Which type of network connection should be used to enable secure communication between DataPower appliances in a high-availability configuration?

A direct Ethernet cable between the two appliances

A dedicated IPsec tunnel for each appliance

A VPN tunnel between the appliances

A secured VLAN for communication between appliances

Q51. When installing a new version of DataPower firmware, what is the recommended procedure to minimize the risk of downtime?

Perform the firmware upgrade during peak usage hours

Use the appliance’s management interface to check for firmware updates and install them

Upgrade the appliance during off-peak hours to ensure minimal impact on users

Perform a rolling upgrade, upgrading one appliance at a time in a cluster

Q52. What is the most effective method to monitor the health of an IBM DataPower Gateway appliance in real-time?

Using the command-line interface to check logs

Enabling system event logs to track all user actions

Configuring SNMP for continuous monitoring

Connecting a debugger to the appliance for detailed diagnostics

Q53. What is the purpose of the ‘Weighted round-robin’ algorithm in ‘Load Balancer Groups’?

It ensures requests always go to a highest weighted server.

It distributes traffic equally among all weighted backend servers.

It prioritizes servers based on assigned weights while balancing traffic.

It sends traffic only to the most recently used server in terms of weighted.

Q54. Scenario: You are tasked with ensuring that a DataPower appliance has both internal and external network access. After configuring the appliance’s interfaces, you are asked to verify that it is reachable from both internal and external systems.
What steps should you take? (Choose two)

Verify network interface configurations and test connectivity from internal and external networks

Check if the appliance’s firewall allows connections from both internal and external networks

Disable all external network connections to limit access to the appliance

Perform a packet capture on the interfaces to ensure proper communication

Q55. Which of the following actions will help you troubleshoot a network connection issue where a DataPower appliance cannot communicate with external services?

Inspect the network interface configuration and verify correct settings

Check the appliance’s memory usage to ensure it is not overloaded

Temporarily disable the external network interface to prevent unauthorized access

Perform a network load balancing test to check for traffic distribution across multiple interfaces

Q56. What potential issues can be identified from the file names of the provided Secure Backup files, for a Secure Restore?
backupmanifest.txt
cert.tgz
local.tgz
password-map.tgz
root.tgz
store.tgz

cert.tgz should be crypto.tgz

local.tgz should be localfiles.tgz

root.tgz should be rootdirectory.tgz

backupmanifest.txt should be backupmanifest.xml

Q57. To perform a reinitialization of a DataPower appliance, which of the following must be done first?

Reset the appliance to factory default settings

Backup the current appliance configuration

Upgrade the firmware to the latest version

Reboot the appliance and clear the cache

Q58. Which of the following steps should be performed to configure a network interface on a DataPower appliance?

Select the interface type and assign the appropriate IP address

Assign a default gateway and configure DNS settings

Choose the type of traffic (HTTP/HTTPS) to be handled by the interface

Configure only the IP address and leave other settings as default

Q59. Which of the following protocols should be used to secure communications between DataPower appliances in a high-availability configuration?

FTP

SSH

SSL/TLS

Telnet

Q60. Which of the following is a key benefit of using an external syslog server to collect logs from a DataPower appliance?

It allows logs to be automatically analyzed and actioned in real-time

It ensures logs are not lost if the appliance experiences a failure

It reduces the need for system monitoring on the appliance itself

It helps reduce the appliance’s CPU and memory usage

Loading …

Latest 2026 Realistic Verified C1000-196 Dumps – 100% Free C1000-196 Exam Dumps: https://www.examcollectionpass.com/IBM/C1000-196-practice-exam-dumps.html

Leave a Reply Cancel reply