View All HPE0-S59 Actual Free Exam Questions Sep 03, 2026 Updated [Q70-Q86]

Rate this post

View All HPE0-S59 Actual Free Exam Questions Sep 03, 2026 Updated

Pass Authentic HP HPE0-S59 with Free Practice Tests and Exam Dumps

HPE0-S59 exam consists of 60 multiple-choice questions, which are designed to test the candidate’s knowledge and understanding of HPE compute solutions. The candidate is required to complete the exam within 90 minutes and achieve a passing score of 68%. HPE0-S59 exam is available in multiple languages, including English, German, French, Japanese, and Spanish.

NEW QUESTION 70
Hotspot Question
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.

NEW QUESTION 71
Which statement about the HPE D3940 storage module is true?

SATA drives requires redundant 10 adapters to be installed in this module

Up to five modules can be installed in a single frame with Gen10 servers

it is configured through CLl available from HPE Synergy console

Only one type of drives (SATA, SAS, SSD) can be installed in each module

NEW QUESTION 72
Your customer has the following HPE Synergy setup
– 3 HPE Synergy 12000 Frames
– 4 HPE Virtual Connect SE 100 Gb F32 Modules
– 2 HPE Synergy 50 GO Interconnect Link Modules
– 36 HPE Synergy 480 Gen10 Plus compute modules
– 2 HPE Composer 2 modules
Which statement about this setup is true?

To use all compute nodes, the customer must create at least two logical enclosures

To manage all frames, the customer must buy two additional HPE Composer 2 modules

The customer must buy 36 HPE OneView Advanced licenses to manage compute modules

The customer can add one D3940 storage Module to each of the frames

NEW QUESTION 73
Refer to Exhibit:

Your customer plans to update the firmware for the logical interconnect shown.
Based on the information in the exhibit, which statement about network connectivity is true?

Only the manual orchestration method will allow a firmware upgrade without causing network downtime.

It is possible to update this logical interconnect without network downtime if orchestrated method is used.

Compute nodes will experience network downtime if the Force option is selected, as it will enforce parallel update.

Compute nodes will experience network downtime not longer than 1 minute regardless of the orchestration method.

NEW QUESTION 74
Match each HPE Synergy logical component with the definition.

NEW QUESTION 75
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter. The customer wants to use them to manage HPE Synergy Gen10 compute modules. HPE ProLiant Gen 10 servers and an MSA array.
Which statement about compatibility of the existing environment with the planned software components is true?

Both HPE Synergy Gen10 full-height compute module plugins will require a license

HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers

To use the required plugins HPE ProLiant Gen10 systems must be managed using HPE OneView

HPE Storage integration Pack for VMware vCenter does not support MSA arrays

NEW QUESTION 76
Your customer with an HPE Synergy environment needs to prevent a timeout and loss of communication during an external switch firmware upgrade. Which parameter can the customer configure within an uplink set to meet their requirements?

The customer should set the connection mode to manual.

The customer should disable LACP failover trigger.

The customer should enable LACP load-balancing.

The customer should set LACP timer to long.

NEW QUESTION 77
Match each HPE OneView network type with its definition.

NEW QUESTION 78
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?

If the D3940 module is imported in managed state that allows volume provisioning.

If there Is a logical interconnect created based on the 12Gb SAS switches.

If the D3940 storage module is property licensed through HPE OneView interface.

If there is at least one ISCSI network configured that will provide access to the module.

NEW QUESTION 79
A company has an HPE Synergy system and an HPE Alletra array, which are connected as shown in the exhibit. What is one recommended setting for the FC networks defined on HPE Synergy?

Setting the network type on each network as Fibre Channel over Ethernet (FCoE)

Associating each network with a SAN Manager

Assigning at least one port on each redundant VC FC module to the uplink set that carries each network

Setting each network up as a direct-attach network

NEW QUESTION 80
Your customer has me following HPE Synergy setup:
– Three frames fully populated with HPE Synergy 480 Gen10 Plus modules
and 25Gb/s downlink speed formulating a single logical enclosure
– Two HPE Virtual Connect SE 100Gb F32 Module for Synergy
– Four HPE Synergy 50Gb interconnect Link Module
– Six HPE Synergy Virtual Connect SE 32Gb FC Modules
The customer needs to add a frame.
Which statement about the expansion of this setup is true?

The additional frame must have HPE Virtual Connect FC modules installed

The customer can grow the existing logical enclosure up to 5 frames

The customer has to create a new logical enclosure for the additional frame

The additional frame cannot have 12Gb SAS connection modules installed

NEW QUESTION 81
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module.
Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module.
What should you verify first when troubleshooting this problem?

If the D3940 module is imported in managed state that allows volume provisioning.

If there Is a logical interconnect created based on the 12Gb SAS switches.

If the D3940 storage module is property licensed through HPE OneView interface.

If there is at least one ISCSI network configured that will provide access to the module.

NEW QUESTION 82
Your customer wants to add a second HPE Synergy frame to an existing logical enclosure Based on a single HPE Synergy frame. The customer wants to use a highly available master setup.
Which procedures should De performed during the expansion process? (Select two.)

Create a new logical interconnect group and enclosure group for two frames setup

Create a new logical enclosure based on both HPE Synergy frames.

Re-parent an existing enclosure group to the new logical interconnect group.

Modify an existing logical interconnect to include second HPE Synergy frame.

Move one of the master modules to the appropriate interconnect bay in the second frame.

NEW QUESTION 83
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.

NEW QUESTION 84
Refer to the exhibit.

Which statement about this logical interconnect group is true?

The master modules are located in the interconnect bays 2 and 5

For the given downlink speed, the maximum number of frames is reached

Both master modules are located in the same HPE Synergy frame

To use interconnect bay set 3, all compute nodes must be half-height

NEW QUESTION 85
Match HPE SimpliVity term with the definition.

NEW QUESTION 86
You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group What should you check to fix the issue?

if both FiexNICs are configured with the same speed

If the logical enclosure is built on at least three HPE Synergy frames

if both FiexNICs are connected to different networks

if the logical enclosure is configured with redundant master modules

To pass the HP HPE0-S59 (HPE Compute Solutions) Certification Exam, candidates must have a deep understanding of HPE compute solutions and be able to apply that knowledge to real-world scenarios. They must also be able to troubleshoot and resolve issues related to HPE compute solutions, as well as provide recommendations for improving performance and efficiency. HPE0-S59 exam is designed to be challenging, but passing it can help IT professionals advance their careers and increase their earning potential.

New HPE0-S59 Exam Questions Real HP Dumps: https://www.examcollectionpass.com/HP/HPE0-S59-practice-exam-dumps.html

Leave a Reply Cancel reply