[May-2022 Newly Released] NS0-592 Exam Questions For You To Pass [Q21-Q40]

4/5 - (1 vote)

[May-2022 Newly Released] NS0-592 Exam Questions For You To Pass

Network Appliance NS0-592 Exam: Basic Questions With Answers

NetApp NS0-592 Exam Certification Details:

Passing Score	62%
Recommended Training	ONTAP Troubleshooting (ILT)
Duration	120 minutes
Number of Questions	60
Exam Price	$150 USD
Exam Code	NS0-592 NCSE ONTAP

NEW QUESTION 21
A customer reports that OnCommand Performance Manager shows that the workload on node-02 in a 4-node cluster has increased to a level that is higher than the threshold. The customer wants to avoid this issue becoming a performance problem.
Which two actions would result in achieving this goal? (Choose two.)

Use the volume move command to move one or more volumes to another aggregate that is owned by another node that is less utilized.

Use the storage aggregate relocation command to offload an aggregate to its partner.

Use the storage aggregate scrub command to verify the parity on the busy aggregates.

Physically move the shelf to another node that is less utilized.

NEW QUESTION 22
At a customer site, the storage failover giveback command fails when giving back the root aggregate.
What would be two reasons for this failure? (Choose two.)

There are active NFS connections.

There are failed disks.

The HA interconnect is not operational.

There are active SIS operations running.

NEW QUESTION 23
A customer called you after a failure in their Microsoft Hyper-V environment on the “SVM1” SVM. The customer wants to enable nondisruptive operations (NDO) to prevent future failures.
In this scenario, which two actions must be performed? (Choose two.)

Verify that the continuously-available option is set on the CIFS share.

Verify that SMB3 is enabled.

Verify that SMB2 is enabled.

Verify that the branchcache option is set on the CIFS share.

NEW QUESTION 24
A customer performs a takeover and giveback of their controllers and notices that several of their NFS clients lose access to their volumes for a short period of time during the SFO process. The customer reviewed the LIF failover policies, and the polices are correct.
What is the reason for this behavior?

The clients are using NFSv4 to access the volumes.

The export policies are incorrect and must be updated with node’s HA partner LIF information.

A firewall is blocking the necessary network ports and needs to be updated to allow NFS communication.

NFSv4 file locks need to be broken manually before initiating an SFO operation.

NEW QUESTION 25
A customer reports that a takeover has been disabled on an HA pair.
What would be a cause for this to happen?

The HA interconnect is not functioning properly.

There is a disk running too hot.

The interface for the hardware assist has become unavailable.

The cluster network is not functioning properly.

NEW QUESTION 26
A customer has requested your assistance with replacing a DS224C disk shelf from their cluster nondisruptively.
Which two actions should be performed before physically replacing the shelf? (Choose two.)

Verify that the system is configured as multipath high availability.

Upgrade the IOMs in the shelf before starting the removal process.

Verify that the drives in the shelves are spares and ownership is removed.

Zero the disks before performing the physical shelf removal.

NEW QUESTION 27
For restore purposes, a storage administrator on an ONTAP system created a FlexClone of a volume that contains a LUN from a specific snapshot. This LUN cannot be seen by a Windows client after a disk rescan is performed by using Disk Management.
In this scenario, which statement is correct?

The cloned LUN must be brought online.

The cloned LUN needs to be mapped to an initiator group.

The cloned volume must be split from the source volume before the LAN can be used.

The cloned LUN must be renamed to a different name than the name of the source LUN.

NEW QUESTION 28
You are investigating a CIFS issue at a customer site, but it is unclear which SMB version is being used between the client and the server. The customer has provided you with a packet trace output.
In this scenario, which packet exchange contains information to indicate which SMB version was agreed upon by the client and the server?

Ioct1 Request FSCTL_DFS_GET_REFERRALSIoct1 Response FSCTL_DFS_GET_REFERRALS

Session Setup Request Session Setup Response

Negotiate Protocol RequestNegotiate Protocol Response

Tree Connect Request TreeTree Connect Request Response

NEW QUESTION 29
What is a major difference between NFSv3 and NFSv4.x?

NFSv4.x is stateful, and NFSv3 is stateless.

NFSv4.x requires an auxiliary protocol for status monitoring, and NFSv3 does not.

NFSv4.x is stateless, and NFSv3 is stateful.

NFSv4.x requires an auxiliary protocol for mounting, and NFSv3 does not.

NEW QUESTION 30
You are running a fabric-attached MetroCluster configuration with ONTAP 9.5software. There is a maintenance window for the upcoming weekend. Plexes in your mirrored aggregates between your two data centers have not been synchronizing for two days.
When the resynchronizations begin, they are not as quick as expected, and the process takes more than a day.
You have been modifying the number of concurrent I/O streams using the storage raid-options modify raid.
resync.num_concurrent_ios_per_rg command, but the resynchronization speed stays slow.
You have four separate ISLs between your data centers using Brocade 6510 switches. Hardware problems are not an issue.
Which two actions should you take to prevent this problem in the future?
(Choose two.)

Update to at least ONTAP 9.4 software.

Restart the resynchronizations after modifying storage raid-options modify raid.resync.num_concurrent_ios_per_rg command.

Avoid changes on your aggregates during the maintenance window.

Take the corresponding plexes offline before maintenance to avoid a base-level synchronization.

NEW QUESTION 31
Click the exhibit button.

A customer reports that when they are failing over Hyper-V VMs, the process fails, and the server reports an error that indicates that there is something wrong with the storage.
Referring to the exhibit, which three actions would be required in ONTAP to solve this problem? (Choose three.)

Verify that the -symlink-properties parameter is enabled on the share.

Verify that the access-based-enumeration share parameter is configured.

Verify that the continuously -available share parameter is configured.

Verify that -offline-files parameter is set to manual on the share.

Verify that the oplocks share property is configured.

NEW QUESTION 32
A new cluster running ONTAP 9.5 has just been installed and you want to create a FlexGroup volume. Which action will accomplish this task?

Use the storage pool create command.

Use the volume create command.

Use the Deploy utility to provision the FlexGroup volume.

Use the volume size command.

NEW QUESTION 33
A field support engineer has just replaced the IOXM on NODE2 on a FAS8080 running ONTAP 9.1. After the replacement, the customer is unable to perform a giveback because the interconnect is down.
In this scenario, which statement is correct?

Verify that there cross-links between the interconnects.

Verify that the installed FC-VI cards are configured properly.

Verify that the interconnect cables on the motherboard are connected correctly.

Verify that the interconnect cables on the IOXM are connected correctly.

NEW QUESTION 34
A customer has created an interface group (igroup) named a0a, a VLAN named a0a-2500, and a data LIF associated with the VLAN interface that has been assigned an IP of 10.254.10.100. The customer is able to ping 10.254.10.100 from a Windows client without any issues, but data traffic is not working.
In this scenario, what is the solution to the problem?

Disable flow control on the a0a interface.

Configure an appropriate service policy for the data LIF.

Correct the MTU mismatch between the broadcast domain configuration and the upstream network switches.

Allow data traffic by using LIF firewall policies.

NEW QUESTION 35
A customer mentions that their intercluster SnapMirror replication operations consistently take much longer than normal. While troubleshooting, you want to initiate a test SnapMirror session to collect performance data.
How would you accomplish this task?

Run the network test-path command to simulate a SnapMirror connection and record the latency/throughput data.

View the active network connections to the node to see if there a large number of active connections.

Use the ifstat command to collect network performance data for the physical interface.

Run the network statistics lif show command for the intercluster LIF to simulate a network connection.

NEW QUESTION 36
Click the exhibit button.

Referring to the exhibit, which change is required to enable the CIFS Autolocation function for the Users share?

Edit the CIFS share’s properties to remove the changenotify property.

Re-create the LIFs to allow both CIFS and NFS protocols.

Change the CIFS share’s Symlink Properties parameter to symlinks.

Modify the CIFS server’s option to enable SMB multichannel.

NEW QUESTION 37
A customer’s FAS8200 node1 went down an hour ago after a WAFL inconsistency error. All data is being served from partner node2, but the storage failover show command output is not showing a node1 as “Waiting for giveback”.
What is the corrective action for this situation?

Re-create the root aggregate on node1.

Boot the system and run the WAFL_check command on the inconsistent data aggregate.

From the LOADER prompt, run the wafliron command on the system’s root aggregate.

Boot the system and run the wafliron command on the inconsistent data aggregate.

NEW QUESTION 38
A customer reports that copying data over iSCSI attached LUNs is taking significantly longer than usual. The customer asks you to help to identify the root cause of this problem.
Which two perfstat sections would you use to accomplish this task? (Choose two.)

stats lun

lun stats -vserver

statit

stats volume

NEW QUESTION 39
The error message shown below is reported in the EMS log file.
“[sis.changelog.full:warning]: Change logging metafile on volume DATA1 is full and can not hold any more fingerprint entries.” What are two ways to solve this problem? (Choose two.)

Clear the changelog manually so that the operation can restart.

Increase the size of the changelog to allow the operation to continue.

Modify the storage efficiency policy so that deduplication runs more frequently.

Modify the threshold that triggers a deduplication operation.

NEW QUESTION 40
Click the exhibit button.

The storage administrator for the company example.com is attempting to join an SVM to their Active Directory as SVM1. The computer account must also be joined to the Secure organizational unit. Attempts to perform this action using the CLI fail with the error message shown in the exhibit.
What is the reason for this error?

The requested OU Secure does not exist in the Active Directory and must be created by the Active Directory administrator.

The requested OU Secure has incorrect principal and errored with
KRB5KDC_ERR_S_PRINCIPAL_UNKNOWN.

The administrator account password used in vserver cifs create was not entered correctly.

The syntax is incorrect; it should be vserver cifs create -cifs-server svm1 -domain example.com -ou ou=Secure, dc=example, dc=com.

NetApp NS0-592 Exam Topics:

Section	Objectives
Hardware	-Demonstrate knowledge of hardware troubleshooting -Demonstrate knowledge of troubleshooting SP or BMC -Describe the hardware components in a Fibre Channel environment -Demonstrate knowledge of the cluster interconnect infrastructure -Describe MetroCluster configurations
Software-defined ONTAP Solutions	-Describe software-defined ONTAP solutions