Pass Cisco 300-510 exam questions – convert Test Engine to PDF [Q14-Q36]
300-510 | Cisco

Pass Cisco 300-510 exam questions – convert Test Engine to PDF [Q14-Q36]

300-510 | Cisco
Rate this post

Pass Cisco 300-510 exam questions – convert Test Engine to PDF

Pass Your 300-510 Exam Easily – Real 300-510 Practice Dump Updated Apr 23, 2022

Test 300-510, also referred to as SPRI, is a Cisco exam that is about the execution of advanced solutions for routing for Service Providers. Someone who passes it ends up with the Cisco Certified Specialist – Service Provider Advanced Routing Implementation certificate, which is specific only to this test. The other main certificate achieved upon nailing 300-510 as well is the CCNP Service Provider.

Official Course for Exam 300-510: Overview

The course created for 300-510 test is otherwise called ‘Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) v1.0’. It is theory as well as practical based and covers the integration of advanced technologies for routing. This includes multicast routing, routing protocols, policy language, segment routing, and MPLS (Multiprotocol Label Switching). Thus, students will be able to expand their skills and awareness as concerns core networks associated with the Service Provider. Such a course as well is a way to boost your readiness for 300-510 exam. Each exam topic in this training is adequately traversed to ensure your knowledge in addition to skills are expansive and deep within the domain. By and large, there are varied ways to approach this course, including e-Learning, instructor-led classroom learning, and digital or virtual learning. The overall procedure lasts for 5 days, where candidates will be covering content through theory as well as practice since the course modes, except for e-Learning, combine practical labs and theory. Passing through instruction included in this class for 300-510 renders you with highly demanded skills for maintaining and operating advanced technologies that associate with core networks about the Service Provider. Another matter concerns enhancing your skills that are into the executing of SP core technologies. There is also the bit about gaining 40 CE credits that will go towards certificate renewal at the end of three years, which is the certification validity period.

 

NO.14 Refer to the exhibit.

While configuring router 2 with all the default values, a network engineer cannot see any route received in router 1. How should the engineer solve the issue?

 
 
 
 

NO.15 After an engineer configures BGP in R1, it starts receiving this message
*Jun 29 13:30:50.122: %BGP-5-ADJCHANGE: neighbor 192.168.10.1 Down User reset Jun 29 13:30:52.341: %BGP-3-NOTIFICATION: sent to neighbor 192.168.10.1 2/6 (unacceptable hold time)
0 bytes
Which action makes the peering come back up again?

 
 
 
 

NO.16

Refer to the exhibit. After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?

 
 
 
 

NO.17

Refer to the exhibit. After you applied these configurations to routers R1 and R2, the two devices could not form a neighbor relationship. Which reason for the problem is the most likely?

 
 
 
 

NO.18 Refer to the exhibit. CE1 and CE2 cannot communicate through the service provider BGP peering is established between PE1 and PE2.
IS-IS is the only routing protocol running in the service provider core.
What step can be done to troubleshoot the issue?

 
 
 
 

NO.19 Refer to the exhibit. After troubleshooting BGP traffic steering issue, which action did the network operator take to achieve the correct effect of this configuration?

 
 
 
 

NO.20 Refer to the exhibit.

An engineer working for a private telecommunication company with an employee id 3977 74 814 implemented the configuration on Router 1. what is the effect of it?

 
 
 
 

NO.21

Refer to the exhibit. An engineer is troubleshooting an OSPF issue. Router 1 has a neighbor relationship with router 2. Only router 1 classful EIGRP routes can be seen on router 2. In order for all EIGRP routes to be redistributed correctly, which action should be taken?

 
 
 
 

NO.22 Refer to the exhibit.

The green policy is designed with low delay, and the pink policy is designed with low cost. What is the next hop for node A on its way to node D, with the objective of achieving a low delay?

 
 
 
 

NO.23 An engineer is troubleshooting end-to-end customer traffic across an MPLS VPN service provider network.
Which tasks should the engineer use to solve the routing issues? Drag and drop the table types from the left onto the most useful troubleshooting tasks/router types on the right. (Not all options are used.)

NO.24 Which feature is used in multicast routing to prevent loops?

 
 
 
 

NO.25 Refer to the exhibit.

After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?

 
 
 
 

NO.26 A network engineer is troubleshooting OSPF multiareA. Which Cisco IOS XR feature should the engineer use in order to streamline OSPF issue?

 
 
 
 

NO.27 Which command is used to enable BIDIR-PIM under global configuration mode for Cisco IOS XE Sofware?

 
 
 
 

NO.28 Refer to the exhibit.

Which task must you perform on interface g1/0/0 to complete the SSM implementation?

 
 
 
 

NO.29 Refer to the exhibit. An engineer working on a client’s network is trying to solve the BGP community issue on R1 and R2 routers. After displaying the BGP entries, the engineer notices that both routers still have different outputs. Which action must the engineer perform to any of the routers to correct the problem and get the same output?

 
 
 
 

NO.30 Refer to the exhibit

Which router does R1 install as an alternate next hop when trying to reach R3 if LFA is enabled?

 
 
 
 

NO.31 A network consultant is troubleshooting IS-IS instances to identify why a routing domains is having communication problems between the two instances. Which description of the possible cause of issues in the routing domain is true?

 
 
 
 

NO.32 Refer to the exhibit.

While configuring router 2 with all the default values, a network engineer cannot see any route received in router 1. How should the engineer solve the issue?

 
 
 
 

NO.33 Refer to the exhibit.

A network engineer applied configuration on R1 to summarize all ISIS routes, but R2 Is still receiving specific routes from R1. The engineer has confirmed that both routers are configured with the correct summarization configuration, but R1 is not sending the correct summary routes. Which configuration must be applied to router R1 to summarize routes within Level 1?

 
 
 
 

NO.34 When deploying a nationwide network of routers, what is the benefit of using BGP confederations?

 
 
 
 

NO.35 Refer to the exhibit.

How are packets directed through the data plane when SRv6 is implemented?

 
 
 
 

NO.36 Refer to me exhibit. A network engineer sets up a multihoming eBGP topology where multiple Autonomous Systems connect to ASN 64501.

The engineer wants to block all the routers coming from ASN 64502. but allow all the others. For that purpose, the following AS Pam prefix 1st s being used:
(config)#ip as-path access-list 10 deny _64502$
What must be fixed to achieve this result?

 
 
 
 

300-510 Real Exam Questions and Answers FREE: https://www.examcollectionpass.com/Cisco/300-510-practice-exam-dumps.html

         

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below