Pass Supermicro SMI300XE Exam Quickly With ExamcollectionPass [Q12-Q30]

5/5 - (1 vote)

Pass Supermicro SMI300XE Exam Quickly With ExamcollectionPass

Prepare SMI300XE Question Answers – SMI300XE Exam Dumps

NEW QUESTION 12
How many GPUs can be missing or undetected by the system to successfully execute the ROCm software commands?

None

NEW QUESTION 13
When working on the GPU tray, where should you place it to ensure a safe work environment?

On top of the chassis

A flat surface

On the floor where everyone is walking by

On a cardboard box that may or may not support the weight of the tray

NEW QUESTION 14
If a GPU is not detected in the IPMI GUI reports, what would be the next step to recover the missing GPU?

Press the GPU button on the rear of the server for 5 seconds to reinitialize the GPU tray.

While powered on, remove the GPU tray, and remove all power connectors and fan connectors from the baseboard and then reseat the connectors.

Turn off the server, then try reseating the GPU and heatsink, turn on the server, and verify in IPMI GUI that the GPU has returned.

Turn off the server and reseat the motherboard tray.

NEW QUESTION 15
Which SUM command is used to check basic system information?

sum.exe -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo

sum.exe call system information

sum.exe -ip 10.1.1.100 -user ADMIN -pass ADMIN -command checksysteminfo

sum.exe -I 10.1.1.100 -u ADMIN -p ADMIN -c checkassetinfo

NEW QUESTION 16
In the IPMI Dashboard, how can the health event log help you identify a failure with a component like a fan or power supply?

The red severity status identifies failed components in the log.

The blades will be turning a bright orange.

The purple status indicator in the IPMI Dashboard indicates failures.

In IPMI under Configuration, configure a new fan.

NEW QUESTION 17
When you first access the IPMI Web GUI, you will be prompted to log in. Where can you find the password?

It will be on the tag next to the I/O Module.

Use the system model number as the password.

It will be on the label on the bottom of the system.

It will be on the label on the bottom side of the system cover.

NEW QUESTION 18
What is the executable file extension used in Windows for SUM?

.exe

.sh

.txt

binary

NEW QUESTION 19
How many people are required to safely remove the GPU tray from the MI300X?

1 person

6 people

2 people

10 people

NEW QUESTION 20
The syntax and options for the SUM command differ between Windows and Linux.

True

False

NEW QUESTION 21
Which two situations could occur if you forcefully shift the release lever without first unlocking the red lock?(Choose 2 answers.)

All the answers are correct.

The power supply unit will fail.

You could permanently damage the lock on the power supply unit.

The power supply unit can no longer be secured into the tray.

NEW QUESTION 22
Which SUM command is used to verify the AOC NIC installed on the system?

sum.exe -i 10.1.1.100 -u ADMIN -p ADMIN -c getaocnicinfo

sum.exe -i 10.1.1.100 -u ADMIN -p ADMIN -c getaocinfo

sum.exe-read all AOC-from 10.1.1.100

sum.exe -ip 10.1.1.100 -user ADMIN -pass ADMIN -command getnicinfo

NEW QUESTION 23
When removing the GPU tray, why is it important that you keep it straight?

Movement can damage the upper portion of the chassis or the fans below the GPU tray.

The GPU tray only slides in or out at a 16-degree angle.

You won’t be able to set it on your work surface if you don’t.

Because of the screws on either side of the tray.

NEW QUESTION 24
Before disconnecting the cables from the NVMe backplane, you should map or take a picture of the cables to ensure they are returned to the same locations. True or False?

True

False

Real Supermicro SMI300XE Exam Questions [Updated 2025]: https://www.examcollectionpass.com/Supermicro/SMI300XE-practice-exam-dumps.html

Leave a Reply Cancel reply