[Q192-Q211] HCL-HWA-ADM-102 Dumps are Available for Instant Access [2026]

Q192. DWC DB2 z/OS configureDb.sh reports “VCAT catname not authorized” despite correct JCL volname. The STOGROUP TWSSDWC requires catalog override. Which configureDb parameter resolves VCAT authorization for DWC database creation?

Grant dbadminuser CATALOG ADMIN

–stogroup TWSSDWC –vcat catname –volser volname in properties

Modify EQQINDWC JCL VCAT parameter pre-execution

–zstogroup=TWSSDWC –zcatalognm=catname

Q193. In a complex scenario combining typical installation, server setup, Docker deployment, and hardware: Planning a containerized high-availability HCL Workload Automation 10.2 with 2 masters and consoles on OpenShift. Which actions ensure success? (Select All that Apply)

Use Helm chart with scaled servers

Configure custom secrets for certificates if needed

Access entitled registry for images

Set umask 022 before traditional install

Ensure 2 GB minimum swap on host

Q194. Scenario: Dynamic agents in HCL Workload Automation 10.2 fail to register or submit jobs behind a gateway, showing connectivity issues to the dynamic workload broker. What advanced configurations in JobManagerGW.ini are required to resolve this in a secure environment?

Specify gateway ID matching broker registration

Configure proxy settings for outbound broker connections

Set SSL certificates path for broker communication

Enable remote resource command execution on gateway

Increase timeout values for broker polling

Q195. A command-line user needs to run conman monitoring commands such as showjobs and showresources against a remote master domain manager from a dedicated monitoring server. The administrator wants to avoid passing connection arguments on every command and to prevent storing the user’s password in scripts. According to HCL Workload Automation 10.2 connection handling, which approach best satisfies these requirements?

Define connection parameters such as hostname and port as local options in the localopts file on the monitoring server, and rely on the logged-on user’s credentials for monitoring commands

Embed the connection parameters and password into an environment variable loaded from a script for each monitoring session

Store both username and password as plain text in the localopts file so that conman automatically logs in without user interaction

Configure the connection parameters exclusively as command-line arguments for each conman command and omit any local configuration

Q196. Planman UPGRDJSTREAM processing 3200 final streams during HCL HWA 10.2 production cycle shows 29% “Symphony locked” failures across mixed FTA/dynamic pool.
What sequence guarantees upgrade completion?

conman “flushq all”; planman create

conman “stopmonitor”; planman symreq all; planman UPGRDJSTREAM /FORCE

planman resyncplan all /FORCE; upgrade

planman extend 24h; retry upgrade

Q197. In a large-scale HCL Workload Automation 10.2 environment with multiple domains and thousands of daily jobs, an administrator notices that the production plan extension via JnextPlan is taking excessively long due to carryforward settings and unresolved dependencies. To optimize the production cycle management while minimizing risk of job loss across the plan rollover, which combination of global options and planman parameters should be configured? (Select three)

Use planman resync after JnextPlan to ensure database-plan consistency during high-load extensions

Disable carryforward entirely and manually submit critical job streams post-rollover

Set carryforward = all in global options and use planman extend with -for 48:00

Configure enPlanAudit = yes and monitor audit logs for dependency resolution bottlenecks

Set enCarryForward = yes and specify carryforward jobs with specific run cycles only

Q198. In customizing production cycle automation, why is the FINALPOSTREPORTS job stream critical in HCL Workload Automation 10.2?

It restarts unlinked agents

It deploys event rules automatically

It includes CHECKSYNC to monitor resync outcome

It extends the plan duration

It runs carryforward jobs

Q199. Which components’ directories are preserved or backed up during HCL Workload Automation 10.2 fix pack application?

TWA_HOME/TWS

TWA_HOME/properties

TWA_HOME/wastools

TWA_HOME/DWC_DATA

TWA_HOME/TDWB

Q200. To kill multiple pending jobs matching a pattern without individual confirmation in HCL Workload Automation 10.2 conman, the command is?

cancel @ + pend

stop @ + backup

deljob @ + pattern

rerun @;cancelpending

kill @#@ + name=BACKUP_* + state=pend;noask

Q201. Global Settings on Job Streams via security file limit run cycle complexity to 50 rules, but complex cycles reject. To exempt prod cycles, which syntax allows?

global.cycle.complex.prod=true

CYCLE_PROD_EXEMPT=true

[GlobalRunCycles] prodComplexity=unlimited

[Cycles] production=50+

Q202. In HCL Workload Automation 10.2, for secure agent execution in FIPS-compliant environments (prior to restrictions), which configuration was key?

DB2 FIPS driver selection

Vault integration mandatory

SSLFIPS mode in JobManager.ini

enablefips parameter during installation

Q203. A pharmaceutical company workload in HCL Workload Automation 10.2 uses variable tables for regulatory-compliant data paths that change quarterly, but carry forward causes stale references post-plan fence. To customize workload with variable tables that auto-expire after 7 days unless explicitly renewed, which variable table attribute controls lifecycle with dependency validation?

TABLE REG PATH=”/q1/data” LIFETIME=7d AUTOEXPIRE=true CHECKDEPS

#VT REG PATH=”/q1/data” ttl=604800s renew=manual deps=check

@VAR REG PATH=”/q1/data” expire=1w dependency.validate=true

VT REG.PATH=”/q1/data” @EXPIRE(days=7) @VALIDATE(dep)

Q204. Healthcare organization performs HCL Workload Automation 10.2 server installation across air-gapped network with offline repository. During serverinst execution for faulttolerant domain manager, installer reports “Open Liberty V24.0.0.9 validation failed” despite manual Liberty download. The target processes HIPAA-compliant workloads requiring FIPS 140-2 crypto. Which server installation prerequisite using precise commands resolves Liberty validation for air-gapped server deployment?

serverinst –libertyPath /custom/liberty –fips140=true –offlineRepo /mnt/repo

Download OpenLiberty-24.0.0.9.zip; unzip -d /opt/liberty/; export WLP_INSTALL_DIR=/opt/liberty before serverinst

Install Liberty via rpm -ivh openliberty-24.0.0.9.rpm; serverinst –skipLibertyCheck

Extract Liberty from TWA media; symlink /opt/HWA/liberty -> ./OpenLibertyServer24.0.0.9

Q205. HCL HWA 10.2 planman create fails mid-production cycle with “Symphony size exceeds 2GB limit” during 18000 job stream finalization across 200 workstations. Current Symphony 1.8GB. DWC shows “Plan creation failed”. What production cycle extension enables completion?

planman extend 72h /FORCE; planman create /CONTINUE

Increase filesystem 10GB; planman create /LARGE

conman “stopsymphony”; rm Symphony; planman create

planman resyncplan all; create 24h increments

Q206. What is the default data directory structure introduced in HCL Workload Automation 10.2 to simplify administration and backup on UNIX systems, and how can it be customized during installation?

All data in TWA_home/TWS; customizable with –data_dir parameter.

Default in user’s home directory; set with -inst_dir only.

Default TWA_home/TWSDATA for server and agent components; customizable at installation time using –data_dir.

Data in TWA_home/properties only; no customization needed.

Data split across /var and /etc; not customizable.

Q207. Healthcare workload customization in HCL Workload Automation 10.2 uses VT.HIPAA.ENCRYPTKEY=”AES256_2026Q1″ but HIPAA audit requires key rotation validation.
To implement variable table with mandatory quarterly rotation and crypto validation, which VT enhancement enforces compliance?

TABLE HIPAA KEY=”AES256_2026Q1″ ROTATE=90 VALIDATE=CRYPTO

#VT HIPAA KEY=”AES256_2026Q1″ audit=quarterly validate=hash

@SECURETABLE HIPAA @ROTATE @CHECKKEY

VT HIPAA.ENCRYPTKEY=”AES256_2026Q1″ @ROTATE(90d) @VALIDATE(crypto)

Q208. Scenario: After pod eviction in Kubernetes for HCL Workload Automation 10.2 dynamic agent, the workstation shows offline despite new pod running. How to reset registration?

Scale down to 0 then up

Manual conman unlink/link

JnextPlan -for 0000

Delete workstation definition and let Helm recreate

Restart broker

Q209. Dynamic Workload Broker HCL HWA 10.2 ResourceAdvisorConfig.properties networkLatencyWeight=0.15 insufficient for 4200 low-latency trading jobs/hour across 165 multi-region agents yielding 33% high-latency allocations. What weighting prioritizes network proximity?

ResourceAdvisorConfig.properties networkLatencyWeight=0.75

ResourceAdvisorConfig.properties enLatencyFence=YES

JobDispatcherConfig.properties networkTier=1

BrokerWorkstation.properties latencySensitivity=CRITICAL

Q210. Workload security HCL HWA 10.2 audit logs credential access attempts. Admin views job parameters containing DB passwords in DWC. What configuration masks credentials in audit trails?

DWC UI redacts credentials automatically

security.txt: audit=mask_credentials

Audit logging excludes job parameters by default

localopts AUDIT_CREDENTIAL_MASKING=YES; AUDIT_SENSITIVE_FIELDS=DB_PASSWORD

Q211. What is the default data directory for Dynamic Workload Console in 10.2, and how is it customized during dwcinst installation?

DWC_home/data; not customizable

User’s home; automatic

/var/HCL/DWC; using -datadir

Same as TWA_home/TWSDATA

DWC_home/DWC_DATA; using –data_dir