Versa Networks VNX301 Real Exam Questions Test Engine Dumps Training With 62 Questions [Q13-Q34]

Rate this post

Versa Networks VNX301 Real Exam Questions Test Engine Dumps Training With 62 Questions

VNX301 Actual Questions Answers PDF 100% Cover Real Exam Questions

Versa Networks VNX301 Exam Overview:

Certification Vendor:	Versa Networks
Exam Name:	Versa Certified Administrator – SD-WAN Specialist
Exam Number:	VNX301
Related Certifications:	Versa Certified SD-WAN Associate (VNX100)
Available Languages:	English
Exam Price:	$150 USD
Real Exam Qty:	60
Certificate Validity Period:	2 years
Exam Duration:	90 minutes
Exam Format:	Multiple Choice, Multiple Select
Passing Score:	Not officially published
Recommended Training:	Versa Secure SD-WAN Configuration and Administration Versa Advanced Services Training
Exam Registration:	Versa Academy Certification Page Kryterion Testing Services
Sample Questions:	Versa Networks VNX301 Sample Questions
Exam Way:	Online proctored or onsite testing center via Kryterion
Pre Condition:	Must hold Versa Certified SD-WAN Associate (VNX100); 1+ year hands-on experience recommended
Official Syllabus URL:	https://academy.versa-networks.com/certification-vnx300

NO.13 A tenant uses CGNAT for internet breakout. You want to verify whether CGNAT rules, pools, static NAT entries, subscribers, and endpoint-independent mapping entries are programmed in the vsmd daemon for a tenant. Which command should you use after connecting to vsmd?

show cgnat tenants

show interfaces brief

show alarms last-n 20

show system uptime

NO.14 A branch has Direct Internet Access enabled. Users can resolve DNS, but application traffic fails. You find that the internet speed test also fails to fetch the server list. Which two configurations should be checked first?

CGNAT and DNS configuration

OSPF area ID and BGP MED

SNMP community and syslog server

VRRP priority and DHCP lease time

NO.15 Which three notification methods does Versa Director allow you to configure for sending system event notifications? (Choose three.)

SMTP

Webhook

MMS

SMS

Kafka

NO.16 An SD-WAN branch is deployed behind a NAT device. In the VSM local-tunnel-site output, which field or flag indicates that a WAN link is behind NAT?

WAN lcl link behind NAT or BN flag

WAN lcl vrf-id only

Tenant ID only

Neighbour site type only

NO.17 You need to quickly check interface administrative status, operational status, tenant ID, VRF, MAC address, and IP address on a VOS device. Which command should you use?

show interfaces brief

show system package-info

show system storage

show coredumps

NO.18 Which two statements are true about the differences between a stateful firewall and a next-generation firewall (NGFW) in a Versa solution? (Choose two.)

Stateful firewalls focus on examining information in L2, L3, and L4 fields, while NGFW can examine all fields of a packet, including L7.

Stateful firewalls can run with any version of VOS, while NGFW requires specific VOS images to operate.

Stateful firewalls cannot log information into Versa Analytics; only NGFW can send logs into Versa Analytics.

Stateful firewalls are available in all of Versa’s licensing offerings, while NGFW requires specific licensing to operate.

NO.19 While troubleshooting the SD-WAN data path, you run show vsf tunnel access-circuits … detail and see the following encapsulation chain: VMLH, MPLS-over-GRE, IPsec-ESP, and VXLAN. What does this output primarily confirm?

The traffic is being bridged without SD-WAN encapsulation.

The branch has created an SD-WAN tunnel encapsulation stack for overlay forwarding.

The branch is using only plain-text GRE without encryption.

The traffic is bypassing the VOS data plane.

NO.20 You are asked to ensure symmetric traffic flows between two SD-WAN branches. Which feature should be enabled to achieve this objective?

Symmetric Forwarding

Symmetric Routing

Equal-Cost Multipath

Packet Striping

NO.21 A branch user reports poor throughput over an SD-WAN tunnel. The command show interfaces detail vni-0/0 shows the interface is operating at half-duplex / 100 Mbps , although the circuit is expected to run at 1 Gbps full duplex. What is the most likely cause?

The Controller is not advertising branch routes.

VXLAN encapsulation is missing on the overlay.

There is an underlay link speed or duplex mismatch.

SD-WAN SLA probing is disabled.

NO.22 Examine the exhibit below.
An SD-WAN administrator has configured Direct Internet Access (DIA) for INET and INET-2 and wants to use SaaS Application Monitoring and SD-WAN policies to steer certain applications to the best Internet path on a certain VOS device.
Which two statements are true regarding the configuration shown in the exhibit? (Choose two.)

The VOS device will determine the optimal path out of INET and INET-2 using a proprietary algorithm.

The VOS device will load balance the sessions across INET and INET-2 as long as they are both SLA- compliant.

The VOS device will start using the LTE traffic if the INET circuit becomes unavailable.

The VOS device will not drop the traffic if there are no SLA-compliant nexthops.

NO.23 Examine the exhibit below.
Spoke1 and Spoke2 are part of Spoke-to-Hub-Only spoke group, the hub is advertising a default route to both the spokes.
Referring to the exhibit, which statement is true?

Spoke1 can communicate with Spoke2 since they are part of the same SDWAN fabric.

Spoke1 can communicate with Spoke2 since the hub is advertising a default route.

Spoke1 cannot communicate with Spoke2 since the spoke group is Spoke-to-Hub-Only.

Spoke1 cannot communicate with Spoke2 since they do not have a common underlay.

NO.24 A branch uses a template variable for the WAN VLAN ID. During deployment, Branch-A receives VLAN
100 and Branch-B receives VLAN 200 from device bind data while using the same template. Which statement is correct?

This is expected because template variables allow unique per-device values.

This is impossible because all devices using a template must share identical VLAN IDs.

The device template must be duplicated for each branch.

The Controller automatically rewrites VLAN IDs after IPsec comes up.

NO.25 Examine the exhibit below.

You are deploying Versa Secure SD-WAN and require high availability for the Versa Directors. You configured the Versa Director high availability parameters shown in the exhibit. With the parameters shown, which two statements are true? (Choose two.)

The administrator must manually initiate the failover to the backup Director.

The backup Director will automatically take over mastership if the primary Director fails.

The primary Director will automatically take over mastership once it comes back online.

The administrator must manually set the primary Director as active once it comes back online.

NO.26 A CGNAT rule is configured, but traffic is not being translated. You want to confirm whether the expected source and destination prefixes are programmed in the CGNAT access list for the tenant. Which command is most appropriate?

show cgnat acl info < tenant-id >

show system status

show device clients

show system storage

NO.27 Examine the exhibit below.
You are configuring Class of Service on a WAN-facing network interface, and you want to perform DSCP rewrite on the packets that are forwarded to the WAN.
However, you are not able to turn on DSCP rewrite.
Referring to the exhibit, what is the cause of this issue?

Rewrite requires the configuration of shaping on the interface.

Scheduler Map and Rewrite cannot be configured at the same time.

The Associate interface/Network setting is set to Interface and not Network.

There are no rewrite rules configured.

NO.28 A branch device is stuck after staging. The Controller does not show the expected branch lifecycle notification. Which statement best describes the role of MP-BGP in the provider organization for this process?

MP-BGP is recommended so notifications for relevant branch events are delivered to Versa Director.

MP-BGP is required only for URL filtering category updates.

MP-BGP replaces IKE and IPsec during branch staging.

MP-BGP is used only between branch LAN routers and user subnets.

NO.29 Examine the exhibit below.
Referring to the exhibit, which two statements are correct? (Choose two.)

All branches will have the same VLAN ID for the LAN network.

All branches can have separate VLAN IDs on the MPLS WAN network.

The VLAN ID must be provided for the INET WAN network.

The VLAN ID field MPLS-WAN network is incorrect.

NO.30 Which two statements are true about templates? (Choose two.)

You can have more than one device template per appliance.

You must have at least one service template per appliance.

You can use variables in a template to allow devices to have unique values.

You can use a Workflow Template to create new device templates.

NO.31 Examine the exhibit below.
You are configuring an IPsec tunnel towards a non-SD-WAN site over the INETTransport-VR. The site IP address is 10.1.1.1. This tunnel is for traffic between the 192.168.100.0/24 and the 192.168.200.0/24 LAN networks. The tunnel does not establish.
Referring to the exhibit, which statement is correct?

The Tunnel Routing Instance is incorrect.

The Routing Instance should be changed to global.

A precedence higher than 0 needs to be set.

The Policy Configuration is missing an additional policy with the subnets swapped.

NO.32 A VOS branch has two WAN circuits. You suspect the configured transport domain mapping is wrong because one link is not building the expected SD-WAN path. Which VSM control-plane command is most useful to check local WAN circuit information, transport domains, NAT status, and local tunnel-site details?

show vsm p2mp local-tunnel-sites 0

show system package-info

show orgs org-services cgnat summary

show device cpuload

NO.33 You have deployed a group of devices in Versa Director, and the field technicians have performed the onboarding tasks onsite. One of the devices has not finished the onboarding process and does not appear in the Appliances list in Versa Director. The onboarding VPN tunnel from the device to the Controller is up.
Which two actions would help you solve this problem? (Choose two.)

View the Tasks list in Versa Director to see whether an error was encountered during the onboarding process.

Use the Monitor dashboard in Versa Director to view the status of the missing device.

Review the Unknown Devices dashboard in the Administration > Inventory menu.

Verify that the device is listed in the Connectors > Local > Resource Pool dashboard.

NO.34 You are configuring the BGP routing protocol between a Versa Secure SD-WAN CPE with AS number
64514 and two upstream service providers: SP1 with AS number 64515 and SP2 with AS number 64519. You want to prefer BGP routes learned from AS 64515 over routes learned from AS 64519. Which BGP path attribute would be used to accomplish this task?

The BGP MULTI_EXIT_DISC path attribute

The BGP ORIGIN path attribute

The BGP LOCAL_PREF path attribute

The BGP NEXT_HOP path attribute

Versa Networks VNX301 Exam Syllabus Topics:

Topic	Details
Topic 1	Versa Secure SD-WAN Infrastructure: Focuses on the core components and architecture of Versa’s SD-WAN platform, including controllers, directors, and secure connectivity between sites.
Topic 2	Versa SD-WAN Services: Covers the WAN services delivered through Versa’s platform, including application steering, traffic policies, SLA monitoring, and link aggregation.
Topic 3	Underlay Overlay Technologies: Covers the foundational transport networks (underlay) and the virtual networks built on top of them (overlay), including tunneling protocols used in SD-WAN deployments.