[Oct 19, 2026] Fully Updated BIM_MGT_101 Dumps – 100% Same Q&A In Your Real Exam [Q30-Q49]

Rate this post

[Oct 19, 2026] Fully Updated BIM_MGT_101 Dumps – 100% Same Q&A In Your Real Exam

Latest BIM_MGT_101 Exam Dumps – Valid and Updated Dumps

Autodesk BIM_MGT_101 Exam Syllabus Topics:

Section	Weight	Objectives
Project Needs Assessment	28%	– Assess project requirements 1. Evaluate client BIM requirements 2. Develop BIM Execution Plans 3. Define project objectives and deliverables – Establish project workflows 1. Select appropriate collaboration workflows 2. Define project roles and responsibilities
Corporate Standards and Documentation	16%	– Create project and content templates 1. Support graphic standards using authoring tools 2. Customize content creation templates 3. Create multidisciplinary model templates 4. Create Autodesk Forma project templates – Develop BIM documentation and training 1. Assess team capabilities and training needs 2. Evaluate BIM technologies and workflows 3. Create BIM execution documentation – Establish BIM standards to align with organizational requirements 1. Research, interpret, and apply industry data standards 2. Create model health thresholds
Data Management	20%	– Manage project data 1. Version control 2. Document and file management 3. Access permissions and security – Manage information exchange 1. Project handover and archival 2. Data exchange workflows
Collaboration Process	36%	– Quality assurance and delivery 1. Monitor model health and compliance 2. Manage project communication 3. Validate project deliverables – Coordinate multidisciplinary models 1. Model coordination 2. Design review workflows 3. Clash detection and issue management

QUESTION 30
Refer to the exhibit.

A client has provided the design team with a title block family and a Shared Parameters file that must be used as part of their standards. Those provided parameters must be applied both in the Project Information area as well as the title block.
When the design team is in the project model and attempts to fill in information into the title block parameters, a question mark appears. What is the likely cause of this?

The shared parameters were included in the title block family but were not loaded into the project file.

The parameters were not included in the Shared Parameters file provided by the client.

The Shared Parameters file was not added to the title block family and was using text instead of a label.

The Sheet and Project Information fields were overwritten in the title block.

QUESTION 31
Refer to the exhibits.

The firm’s technical group would like to show demolished elements as dashed red in all future projects. The BIM manager is updating the Revit template to meet this new standard.
Which Phase Graphic Override will accomplish this?

Exhibit 4

Exhibit 2

Exhibit 1

Exhibit 3

QUESTION 32
The BIM manager is coordinating a multi-building project in which each building must maintain a unique internal coordinate system but share a common origin point for site-wide references.
Which two actions are required to correctly manage the coordinate setup in this scenario? (Select two.)

Place the Survey Point at the shared site origin for all buildings.

Create unique Survey and Project Base Points for all buildings, maintaining individual Building Coordination.

Place the Project Base Point at the shared site origin for all buildings.

Share coordinates by acquiring from the master site model, using a single Survey and Project Base Point.

Assign a unique Project Base Point for each building model.

QUESTION 33
During a coordination meeting, project leads ask for a report showing only active clashes between mechanical systems and structural framing in patient-room zones, following the approved clash matrix.
What is the most effective way to provide this report using Model Coordination?

Create a custom View from the published models, then export the filtered clash-list results.

Ask each discipline to review its own clash results and report any critical issues from its perspective.

Export all clash results to a spreadsheet and manually filter by trade and zone.

Assign all relevant clashes to mechanical and structural teams using the Issues tool.

QUESTION 34
During a model health check, a BIM manager notices that an international airport project’s models are 1 GB each. The team has not mentioned any issues, but they did miss a recent 50% Construction Documents deadline.
What should the BIM manager do?

Create a separate model for sheets and ask the team to audit and compact the models every day.

Proceed to check another project’s model health since the team has not mentioned any issues.

Coordinate with the project team to purge the model, remove unused views, and address warnings.

Assign multiple BIM managers to the project and take one week to clear every warning.

QUESTION 35
The BIM Execution Plan (BEP) has just been completed for a new project. To ensure all multidisciplinary team members review and understand their roles and responsibilities, what is the most effective way to distribute the BEP before the project starts and ensure it remains accessible to everyone throughout the project?

Include the BEP as part of the project contract and distribute it at project kickoff.

Conduct a mandatory training session to review the BEP and archive it as official once approved by all disciplines.

Upload the BEP to Autodesk Forma in a shared folder location to serve as a live copy.

Email the BEP to all team members and request that they sign and return it as confirmation of review and agreement.

QUESTION 36
A BIM manager is reviewing a consultant’s architectural model before the next coordination milestone. The project requires each model to conform to a defined naming convention, include COBie parameters, and populate shared parameters according to the Model Element Table. The BIM manager notices that several elements are missing metadata and that some naming is inconsistent.
Which step best supports a systematic evaluation of completeness and compliance with project standards?

Manually review each element in the Model Browser to confirm naming and parameter completeness.

Use a model checker or data-validation tool to compare parameter presence, naming conventions, and required values against the established project standard.

Ask the design team to re-export the model with updated information based on verbal clarification and metadata from the BIM Execution Plan.

Filter out incomplete elements in a 3D view and hide them to avoid confusion during coordination.

QUESTION 37
The BIM manager is working in an Architectural model that uses the phases Existing and New Construction. They have linked in a Structural model that uses only Phase 1 for existing and Phase 2 for new construction. After linking, they notice that demolition elements from the Structural model do not display correctly in the demolition views.
Which approach allows the BIM manager to display linked elements correctly based on this phase setup, without changing the phases in the linked model?

Apply a phase-filter override to the linked model using Visibility/Graphics settings.

Open the linked model and manually change its phase names to match the host model.

Map the linked model’s phases to the host model’s phases in the Revit Link properties.

Override the linked view’s phase settings using view templates in the host model.

QUESTION 38
A contractor has requested the Architectural Revit model for a design-bid-build project to help with their fabrication drawings. The contractor understands and agrees that construction documents will govern in case of discrepancies.
How should the BIM Manager proceed?

Add the contractor to the Autodesk Forma project for model access given their understanding.

Copy the model file and send it as soon as possible.

Verify that the contractor has signed a digital content release form before sending the model.

Export the sheets to DWG format and send those files.

QUESTION 39
What setting should be defined in the Family Template for Mechanical Equipment families intended for use in projects in specific countries?

Object Styles set to the country’s official language.

All parameters set to Instance.

Project Location set to the intended country.

Units set to the intended country’s standard format.

QUESTION 40
The BIM manager is launching a civic center project with strict sustainability and lifecycle data goals. During early planning, each discipline proposes different modelling approaches, and there is concern that downstream data handoff may be inconsistent.
To establish BIM goals and uses that ensure alignment from design through operations, what should the BIM manager do first?
Note: In the context of this exam, the term Level of Development (LOD) is used interchangeably with level of information need.

Ask each team to submit its standard BEPs for review and consolidate them into one reference document.

Finalize the LOD matrix and data drops based on similar past projects, updating it during the design process as needed.

Begin developing the internal BIM templates and content, assuming they will be applicable to this project.

Host a stakeholder session to review the project-specific requirements and BIM uses, and establish mobilization needs and modelling requirements.

QUESTION 41
The BIM manager on a large mixed-use development is leading the development of the project’s information-delivery strategy. The client has strict handover requirements for both asset data and spatial coordination. The design schedule includes overlapping packages, and some task teams are unfamiliar with structured data exchanges.
What is the most appropriate approach to establish the project’s information-delivery plans?

Rely on each task team to define its own data requirements and delivery formats, then consolidate them into a mixed-use matrix mid-project.

Assign each discipline a default set of file-naming conventions and assume its internal processes will align with delivery needs.

Develop a task and information-delivery plan to coordinate when, how, and by whom specific project information will be delivered.

Focus first on model-coordination planning, then address information delivery later in the construction phase.

QUESTION 42
When working with separate Revit templates for each discipline, which elements should be standardized to support collaboration and seamless coordination across the project?

A coordinated set of title blocks, project units, specific view templates, and parameters that include both Project and Shared Parameters.

Individually developed templates with custom levels and grids, allowing each discipline to organize models based on its own internal requirements and modelling preferences.

A blank or out-of-the-box Revit template with no predefined standards, requiring each designer to set up views, parameters, and content from scratch on every project.

A single template used across disciplines with shared settings, general workflows, and uniform file structure to simplify project setup and minimize variation.

QUESTION 43
What is included in a BIM Execution Plan?

Project schedule and design playbook.

Modeling standards and technology ecosystem.

LOD Matrix and project specifications.

Collaboration protocols and project playbook.

QUESTION 44
The BIM manager received a subcontractor’s 3D model containing specialty equipment to be integrated into the federated model. Upon review, they observe that:
Many elements lack consistent object styles and category assignments.
Some components are modelled with excessive detail, affecting performance.
Embedded data does not follow the project’s naming conventions outlined in the BEP.
What is the most appropriate next step when evaluating this geometry and content?

Instruct the subcontractor to simplify geometry and reduce file size, even if some metadata and classifications are lost.

Approve the model as-is to avoid delaying coordination and document the issues for review at the next quality-control milestone.

Review the model against content standards, document noncompliance, and request revisions aligned with agreed deliverable requirements.

Import the model into the coordination environment and apply view filters to hide excessive detail and inconsistencies.

QUESTION 45
A BIM manager is preparing to onboard a group of subcontractors into Autodesk Forma for a large healthcare project. These subcontractors need access to a limited set of model files related only to interior partitions, but should not be able to view or modify structural, MEP, or scheduling content.
What two actions should the BIM manager take to manage data security in this scenario? (Select two.)

Hide coordination issues from the subcontractors to limit liability.

Assign role-based permissions and folder-level access aligned with the subcontractors’ scope.

Create and share a Package with specific set-up content.

Provide access to the entire model set but watermark any non-applicable content.

Assign full project access and ask team leads to verbally explain access limitations.

QUESTION 46
During a weekly BIM health review, the BIM manager compares two versions of the same architectural Revit model submitted one month apart. The newer model’s file size has doubled, synchronization time has increased by 40%, and users report sluggish performance. A model audit reveals no major geometry changes, but warnings have increased from 600 to 750, and several Civil CAD files are now imported.
What is the most likely root cause of the model performance degradation?

A rise in geometry complexity.

An accumulation of audit history and backup data.

The presence of imported Civil CAD files.

The increase in model warnings.

QUESTION 47
A project manager who is not familiar with Autodesk Forma has asked a BIM manager to lead clash detection for their Revit project. The project manager would like to review the issue lists weekly, by discipline, to track progress and coordinate with consultants as needed.
What should the BIM manager do to fulfil this request efficiently?

Export the Autodesk Forma issues to an Excel file manually every week and email it to the project manager.

Schedule weekly reports with appropriate filters in Autodesk Forma that are saved to the project files.

Run the Interfere command in AutoCAD and email the Autodesk Forma issues every week.

Use an Excel file to track issues instead of Autodesk Forma to accommodate the project manager.

QUESTION 48
Refer to the exhibits.

A BIM manager is preparing a site model that includes three separate buildings. Which exhibit shows the correct way to assemble and position the individual building models on the site while maintaining proper coordinates and orientation?

Exhibit 4

Exhibit 3

Exhibit 2

Exhibit 1

QUESTION 49
A federated model has been created for a multidisciplinary project, but clashes are being reported in areas where coordination should already be resolved. Upon investigation, the BIM manager finds that some models were exported with outdated links and local coordinates.
What is the most appropriate next step before proceeding with coordination analysis?

Instruct teams to verify model references and coordinate systems before reassembly.

Freeze the current model state and ask trades to work around the identified issues.

Notify the client and exclude the faulty models from further coordination.

Run an additional clash-detection pass with adjusted tolerance thresholds to reduce clash totals.